joint05 Posted December 17, 2009 Report Share Posted December 17, 2009 hello folks, my navi world is fallen on the floor and now you cant stop the chrono. if you take the top pusher i dont work. the lower pusher seems to work. want can i do. can an usally watchmaker fix that? thx Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted December 17, 2009 Report Share Posted December 17, 2009 Sounds like a job for a watch maker mate Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted December 17, 2009 Report Share Posted December 17, 2009 sorry double post Quote Link to comment Share on other sites More sharing options...
joint05 Posted December 18, 2009 Author Report Share Posted December 18, 2009 do you have a suspicion what might have happened ? Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted December 18, 2009 Report Share Posted December 18, 2009 There are about 15 different parts involved in starting and stopping the chrono, ziggy may know the common fault here but i dont sorry, just to say i doubt it is something you could just pop the back off and fix your self. Quote Link to comment Share on other sites More sharing options...
chiman12 Posted December 18, 2009 Report Share Posted December 18, 2009 If you are mechanically inclined. It might be an easy fix. Before you send it out, check the following (this is an old pic of a gen 7750 btw) Check the arm (circled) on the operating lever. This arm should be applying pressure to the back of the other piece with the pivot. Sometimes the arm gets dislodged, so this could have happened when the watch hit the ground. If dislodged, use a small screw driver and move the arm back into place. DO NOT LIFT UP ON THE ARM. Gently push the thin part of the arm outwards until it properly sits as shown. Then try starting/stopping the chrono again. See if that works. If that doesn't work, then it might be something more severe, then...yes...send it to someone like The Zigmeister to get it repaired Quote Link to comment Share on other sites More sharing options...
joint05 Posted December 18, 2009 Author Report Share Posted December 18, 2009 thanks, i take it to my watchmaker. he think it should be easy to fix. i hope too. i will write monday then i get news. Quote Link to comment Share on other sites More sharing options...
joint05 Posted December 24, 2009 Author Report Share Posted December 24, 2009 my navi world is now by Domenico for repair. i need to say he is a really good man. he makes a completly service. i will sell that watch serviced. so if somebody is intressting, just pm me. i will make pics and set it in sales. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.