eta 2836 stem problem

[Guest nikos1978]

how i can put off the crown stem from eta 2836?

because i put off and now i can not put in

[Toadtorrent]

Can you clarify if the stem is still in the watch and the crown is off the stem, or if you removed the crown and stem and are having a problem re-inserting it into the watch.

If the latter, you should try inserting the stem and crown unit in slowly turning the stem and crown clockwise (winding direction) until you start seeing gears move. Once the gears start moving, depress the stem-release button while pushing in further while turning (don't press the button too hard) and play around with this gently until the stem is re-seated properly.

If the crown is off the stem, you will need to remove the stem first, screw back on the crown with Loc-tite and then re-insert the unit.

[Guest nikos1978]

if you removed the crown and stem and are having a problem re-inserting it into the watch

no the stem in not in the watch

but when i try to put in the stem again

the stem does not lock in the movement

and put off again

[highoeyazmuhudee]

you misaligned the keyless works, youll need to disassemble and reset it, common problem

[Toadtorrent]

you misaligned the keyless works, youll need to disassemble and reset it, common problem

There you go! There is a thread here somewhere on the 2836 or possibly the 2824 keyless works and resetting it. They are essentially the same...but you have to do it from the dial side so hand and dial removal and re-installation are required. Quick and easy...but inconvenient if you haven't done it before.