valerian Posted January 16, 2010 Report Posted January 16, 2010 Hi guys My SSD has been running like a champ for almost two years but it's always been a little too fast (+30 sec/day). So I tried to regulate it and after a few slight turns on the regulation screw didn't do enough I turned it rather far into minus. Now it's a tad too slow (which I could regulate back again). But it also stops every 12 or so hours. Have I killed it by turning the screw too far? Can I fix this myself? Any hint is appreciated! Val.
trailboss Posted January 17, 2010 Report Posted January 17, 2010 Try turning it back a bit mate. Prob just too slow to keep running. Col.
valerian Posted January 17, 2010 Author Report Posted January 17, 2010 Thanks, Col. I'll try this. Just was afraid I could make things worse. Off duct tape balling again. Val.
Rolexman Posted January 17, 2010 Report Posted January 17, 2010 It could be that the beat is out but only turning the regulating screw doesn't effect the beat. It would be an other story if you accidently touched one of the regulating arms...
valerian Posted January 17, 2010 Author Report Posted January 17, 2010 It could be that the beat is out but only turning the regulating screw doesn't effect the beat. It would be an other story if you accidently touched one of the regulating arms... Hmmm. Yes, I thought of this. But I don't think I did this... ATM I'm trying to open the case again. Feel very stupid but I neither manage with a case opener nor with duct tape. I tried ice on the case back and putting penetrating oil on it. Quite at the end with my wits really. Val.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now