Help! Is my 2836 overregulated?

[valerian]

Hi guys

My SSD has been running like a champ for almost two years but it's always been a little too fast (+30 sec/day). So I tried to regulate it and after a few slight turns on the regulation screw didn't do enough I turned it rather far into minus.

Now it's a tad too slow (which I could regulate back again). But it also stops every 12 or so hours.

Have I killed it by turning the screw too far? Can I fix this myself?

Any hint is appreciated!

Val.

[trailboss]

Try turning it back a bit mate. Prob just too slow to keep running.

Col.

[valerian]

Thanks, Col. I'll try this. Just was afraid I could make things worse.

Off duct tape balling again.

Val.

[Rolexman]

It could be that the beat is out but only turning the regulating screw doesn't effect the beat. It would be an other story if you accidently touched one of the regulating arms...

[valerian]

It could be that the beat is out but only turning the regulating screw doesn't effect the beat. It would be an other story if you accidently touched one of the regulating arms...

Hmmm. Yes, I thought of this. But I don't think I did this...

ATM I'm trying to open the case again. Feel very stupid but I neither manage with a case opener nor with duct tape. I tried ice on the case back and putting penetrating oil on it. Quite at the end with my wits really.

Val.