WatchnRoll Posted January 17, 2010 Report Share Posted January 17, 2010 Hey guys, See the picture below. If I receive a pusher is it just an easy fix to put it on the post and push it on? It seems that it won't require the movt to be removed...but I could be wrong. What do you think? Anyone ever replace one? If needed, I will have someone fix it (per Offshore's post about a Florida repair person). Link to comment Share on other sites More sharing options...
FxrAndy Posted January 17, 2010 Report Share Posted January 17, 2010 I believe that the movement has to come out for the pusher to be screwed on correctly at least on my BB i had to remove the pusher stem from the inside to grease the seals and you need to hold the screw from the inside to get them tight again. As an unrecommended short cut a bit of loctite 342 on the threads and then screw it back on, the locktite will set and hold it on the threads but as i say i would not recommend it for a watch you like. Link to comment Share on other sites More sharing options...
Rolexman Posted January 17, 2010 Report Share Posted January 17, 2010 The pusher is held in place by a tiny c-clip. It's not screwed on. So yes, you have to remove the movement in order to fix it. You probably also need new c-clip if it isn't wandering around in the case.... Link to comment Share on other sites More sharing options...
FxrAndy Posted January 17, 2010 Report Share Posted January 17, 2010 In that case they are different to the blackbird then. A better photo would help Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now