Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Completed My Coffee Latte 2533 (Image Heavy)


Cortebert

Recommended Posts

Had a 3646 case lying around doing nothing, it was one I used for measurements for the case backs and brass case rings. Decided to make something of it...with a coffee latte dial...

Silix case reshaped

Silver Soldered the lugs

Silver Soldered the stem tube

Aged the case and plexi

Sandwich dial re-coloured and aged the dial with brown indices

Molnija 3601 movement

Removed serial numbers from movement and made sterile

Nickel plated the re-worked movement bridges

Brass case ring

Donerix Strap (mustard)

Below: Aged the case and solder the lugs

3646build-001.jpg

Below: Next the stem tube needs to be soldered

3646build-002.jpg

Below: Soldering completed on stem tube

3646build-003.jpg

Below: Removed spring bars and soldered fix bars in place

3646build-004.jpg

Below: Added a Donerix Strap (Mustard)

3646build-005.jpg

Below: Added one of my thick case backs (polished version)

3646build-006.jpg

Below: Image shows reflection from the polished back

3646build-007.jpg

Below: Started with a McSherry Dial which I re-coloured aged then filled indices in brown

3646build-008.jpg

Below: Distressed the plexi

3646build-009.jpg

Belolw: Dial and plexi

3646build-010.jpg

Below: Now a Sterile Movement which started life as a Molnija stamped full of serial numbers. The movement has been stripped, serial numbers removed, re-plated with Nickel, and rebuilt

3646build-011.jpg

Below: The arrows indicate were the serial numbers were once stamped into the metal. This area has been heavily reworked and the re-plating has also been carefully aged.

3646build-012.jpg

Link to comment
Share on other sites

Very nice. A dumb question if I may...how do you get the straps on and off on the fixed bar watches??

no...good question. The only way is to de-solder or cut the strap off. But I dont plan taking this strap off for the next 10 years plus, its there to stay....but if I had to I would de-solder using copper braid which acts as a sponge and soaks up molten solder, takes about 5 mins so its not that difficult to remove.

Link to comment
Share on other sites

magnum.jpg

Really really really really ridiculously good looking ;)

P.S. how are those Молния movements holding up? Between all boards you probably have the most experience with them.

Theres good an bad Molnija's out there but get a good one and they are tough and reliable and keep good time considering many are 50 years old... take good care of them and you should get another 50 years...

Link to comment
Share on other sites

killer!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up