ddebo Posted March 8, 2010 Report Share Posted March 8, 2010 Dear RWG~~ If i succeed in making crown guard, i will introduce here i knew that crown guard is made of 316L stainless steel.... is it right?? brothers~ if you let me know this, it will be very helpful for me wish, ddebo Link to comment Share on other sites More sharing options...
NoobyPanFan Posted March 8, 2010 Report Share Posted March 8, 2010 As far as I know you are correct! I am not sure about the pin, but I would assume the same is true. Would be a nice project to see get completed. Many have tried and still more improvements could be made... Best of luck Bro! Link to comment Share on other sites More sharing options...
Watchmeister Posted March 8, 2010 Report Share Posted March 8, 2010 All 316l. Best of luck with the project. The toughest part will be the pin. Link to comment Share on other sites More sharing options...
w0lf Posted March 8, 2010 Report Share Posted March 8, 2010 For sure it's 316L steel. Also the lever is finished differently on A & B transitional CG. It's bead-blasted / natural finish and later on C and newer series the the outside surface of the lever is horizontally brushed about 320-400 grit. Link to comment Share on other sites More sharing options...
ddebo Posted March 9, 2010 Author Report Share Posted March 9, 2010 As far as I know you are correct! I am not sure about the pin, but I would assume the same is true. Would be a nice project to see get completed. Many have tried and still more improvements could be made... Best of luck Bro! thanks bro~ i really want to suceed... i hope i will introduce my result here wish, ddebo Link to comment Share on other sites More sharing options...
ddebo Posted March 9, 2010 Author Report Share Posted March 9, 2010 For sure it's 316L steel. Also the lever is finished differently on A & B transitional CG. It's bead-blasted / natural finish and later on C and newer series the the outside surface of the lever is horizontally brushed about 320-400 grit. Thanks Wolf.. thank a million of your delicate information.. i will consider that wish, ddebo Link to comment Share on other sites More sharing options...
ddebo Posted March 9, 2010 Author Report Share Posted March 9, 2010 All 316l. Best of luck with the project. The toughest part will be the pin. thanks bro~ later i will let you know my result wish, ddebo Link to comment Share on other sites More sharing options...
Drulee Posted March 10, 2010 Report Share Posted March 10, 2010 For sure it's 316L steel. Also the lever is finished differently on A & B transitional CG. It's bead-blasted / natural finish and later on C and newer series the the outside surface of the lever is horizontally brushed about 320-400 grit. Ah, I was just wondering why the levers on the 36B and 82C are a different shade of ti than the rest of the CG. Link to comment Share on other sites More sharing options...
babola Posted March 10, 2010 Report Share Posted March 10, 2010 thanks bro~ later i will let you know my result wish, ddebo Crown guard for which PAM series, specifically? Do you own a genuine watch by any chance and if you do would you mind letting us know what model/series, or simply a year of production if you happen you know. Good luck with the project, and please keep attention on that CG pin and rubber o-ring inside the lever Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now