shkolnik Posted March 9, 2010 Report Share Posted March 9, 2010 All greetings, personally I used for the franken SA case from V3 it more precisely to gen, than V2, but caseback and hand set from V2 it is more exact to gen.......rep bezel V3 IS MORE THIN THAN GEN ! Also I managed to replace bazel on gen..... It was a lot of work....... And here that has turned out..... case and crystal - V3 backcase , hand set and date wheel - V2 dial - gen black batons bezel - GEN !!! bracelet - gen PRO 2 strap - gen OR with gen clasp movement - gen ETA 7750 , +/- 3 sek every day box set and papers - gen Quote Link to comment Share on other sites More sharing options...
Samurai Posted March 9, 2010 Report Share Posted March 9, 2010 Very nice. Where did you get the papers for this? Quote Link to comment Share on other sites More sharing options...
shkolnik Posted March 9, 2010 Author Report Share Posted March 9, 2010 Very nice. Where did you get the papers for this? ebay...... Quote Link to comment Share on other sites More sharing options...
cougaree Posted March 9, 2010 Report Share Posted March 9, 2010 Congratulations! Any wrist shots? How did you exactly get the rep bezel off? Any tips? Quote Link to comment Share on other sites More sharing options...
shkolnik Posted March 9, 2010 Author Report Share Posted March 9, 2010 Congratulations! Any wrist shots? How did you exactly get the rep bezel off? Any tips? I not so well know language.......... But I will try to explain.......... Not to scratch the case, I at first have inserted between bazel and the case the ground credit card, have then hooked a knife......... bezel has jumped out together with glass......... It would be necessary to cover watch that the dust has not got and to continue work....... It is necessary to insert a thin screw-driver from below between bazel and that part of the case which holds glass, thus it is possible to remove bazel........ It is necessary to put into place a part with glass, very precisely!!! Points should correspond to 12 and 6 hours and strongly strongly to press, I would do it with a rag what not to break glass!!! Now gen bazel...... It is necessary to turn out screws....... It is necessary to take out inside a ring and to straighten it.......... Then to bend to another in the form of small waves....... To curtail into a circle and to put into place........ In such kind it is necessary to try to establish bazel on its place helping a screw-driver, before click (from me took some hours)........ All!!!! It is possible to wrap back screws..... Good luck Quote Link to comment Share on other sites More sharing options...
cougaree Posted March 9, 2010 Report Share Posted March 9, 2010 (edited) Thanks for the tip! Edited March 9, 2010 by cougaree Quote Link to comment Share on other sites More sharing options...
maxman Posted March 9, 2010 Report Share Posted March 9, 2010 That Is a beautiful SA, you did a fantastic job, congratz Mike Quote Link to comment Share on other sites More sharing options...
shkolnik Posted March 9, 2010 Author Report Share Posted March 9, 2010 That Is a beautiful SA, you did a fantastic job, congratz Mike Thanks Quote Link to comment Share on other sites More sharing options...
alanytical Posted March 11, 2010 Report Share Posted March 11, 2010 Champion work Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.