Replacement Hands For Mbw Sd

[panerai153]

I would appreciate help with sourcing a good set of hands for my MBW SeaDweller. I'm replacing the DR dial with a white letter dial, genuine crown /tube and insert. AS I posted here before recently, the minute hand on the MBW SD is just not correct. The hand is too long, it's too tapered at the end, but most noticable is the width of the luminous material is probably only 75% as wide as on a genuine hand.

Any help with sourcing a set of hands to fit the MBW movement would be appreciated. I believe this watch has an ETA 2824 movement. Rob told me that genuine hands will not fit the ETA movement.

Thanks

Arthur

P.S. The photo shows the comparison between my SD minute hand and a genuine SD Genuine on top MBW below

[2005SUBMARINER]

I would appreciate help with sourcing a good set of hands for my MBW SeaDweller. I'm replacing the DR dial with a white letter dial, genuine crown /tube and insert. AS I posted here before recently, the minute hand on the MBW SD is just not correct. The hand is too long, it's too tapered at the end, but most noticable is the width of the luminous material is probably only 75% as wide as on a genuine hand.

Any help with sourcing a set of hands to fit the MBW movement would be appreciated. I believe this watch has an ETA 2824 movement. Rob told me that genuine hands will not fit the ETA movement.

Thanks

Arthur

P.S. The photo shows the comparison between my SD minute hand and a genuine SD Genuine on top MBW below

might wana check out offeri they have a section dedicated to eta parts good luck !

[Heywood]

The 28xx movements take the 90, 150, 25 hand sizes. Hands designed to fit Tudor subs will be a direct fit. Their are a couple of people on the bay who sell these.

[2005SUBMARINER]

I would appreciate help with sourcing a good set of hands for my MBW SeaDweller. I'm replacing the DR dial with a white letter dial, genuine crown /tube and insert. AS I posted here before recently, the minute hand on the MBW SD is just not correct. The hand is too long, it's too tapered at the end, but most noticable is the width of the luminous material is probably only 75% as wide as on a genuine hand.

Any help with sourcing a set of hands to fit the MBW movement would be appreciated. I believe this watch has an ETA 2824 movement. Rob told me that genuine hands will not fit the ETA movement.

Thanks

Arthur

P.S. The photo shows the comparison between my SD minute hand and a genuine SD Genuine on top MBW below

try here i think they have what your looking for

eta hands ..