Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Fitting Gen Dial on ROO @12 Sec


Ahky

Recommended Posts

Dear Members.

I have a gen ROO dial (in blue with markers). I'd appreciate your advice in installing it on a ROO @12 sec. Does this procedure require any major modifications to the watch or the dial? or can a my watchmaker just swap (in) the dial?

thanks in advance.

Link to comment
Share on other sites

And once you add the gen movement you need to plug the original case tube hole and drill a new one lower as the gen movement is a chrono module mounted on top of the base movement so the crown sits lower versus the chrono pushers. On the 7750 which comes with the rep they all line up.

Link to comment
Share on other sites

sander's method is the way to go with the least mods...it involves fitting on a date overlay after cutting away some of the plate under the dial. It's not easy but it requires fewer parts.

Edited by bosk
Link to comment
Share on other sites

I have done this mod 3 times and working on 2 other projects right now.

It's not an easy mod. One of the hardest parts is creating the date overlay. You have to shave down a date disc to 0.13mm or less.

To finish the 3 I did so far I used 7 date discs because they are so easy to screw it up.

So if you do this mod for the first time, I would at least order 3 discs or more. ^_^

post-9210-018371100 1275729574_thumb.jpg post-9210-055669400 1275729593_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up