Peter52 Posted June 10, 2010 Report Share Posted June 10, 2010 Hi there guys, i'd like to waterproof my UPO, so i'm about to seal the HE Valve with epoxy. So i pulled out the crown(i hope i didn't damage the keyless work[how can i see that? Date change and time change are working well when i built the crown back in]) but i can't loosen the screws. I tried to use a 1mm and 1,5mm screwdriver but i can't unscrew the three damn screws. Is there any trick to do so? Thanks Link to comment Share on other sites More sharing options...
FxrAndy Posted June 10, 2010 Report Share Posted June 10, 2010 Er no i have never had a problem undoing movement retaining screws, I had a silix PO once where the screws worked the other way you would screw them all the way in to the movement holder and then when it was all in the case you would unscrew them until they caught a lip in the case and held the movement secure. Link to comment Share on other sites More sharing options...
Peter52 Posted June 10, 2010 Author Report Share Posted June 10, 2010 (edited) Hm well i got it from PreciousTime and he told me the movement should be an ETA. It seems, that the screwdriver is to big cause the front won't fit in the gap of the screw. Anyway, i managed to insert the epoxy without removing the movement, i hope it is sealed. I'll let the epoxy dry and will test it tomorrow. Edited June 10, 2010 by Peter52 Link to comment Share on other sites More sharing options...
FxrAndy Posted June 10, 2010 Report Share Posted June 10, 2010 Are you using watch making screw drivers????? or just mall screw drivers from the hardware store, if so do your self a flavor if you plan on working on watchs and get the best screw drivers for can afford, it will save you money in the long run, My current set of 8 were Link to comment Share on other sites More sharing options...
Peter52 Posted June 10, 2010 Author Report Share Posted June 10, 2010 i bought a screwdriver set from a hardware shop for around 10 bucks... But this one opened my eyes for sure and i'll buy some good ones in the near future. I only hope now, that my UPO is at least so waterproof, that i can go swimming with it in the pool. We'll see Link to comment Share on other sites More sharing options...
FxrAndy Posted June 10, 2010 Report Share Posted June 10, 2010 watch bitz (offshore) will have some good screwdrivers at a decent price, I just looked at my last post and i think i need to add that you dont need to spend what i did if you are only using them as a hobby/occasional use, Mine are in almost daily use hence the price i paid. Link to comment Share on other sites More sharing options...
Peter52 Posted June 11, 2010 Author Report Share Posted June 11, 2010 Thanks a lot, i'll get these tools asap. But for now, i just went into the pool with the Omega and...well...hm....absolutly thight. Not pressure tested, but ready to go for swimming, thats all i need Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now