Prsist Posted August 27, 2010 Report Share Posted August 27, 2010 Is it the same ti used in gen watches? A different grade? I'm looking at the Seawolf and am wondering about the quality. If anyone can shed some light on the subject I would appreciate it. Link to comment Share on other sites More sharing options...
Prsist Posted August 27, 2010 Author Report Share Posted August 27, 2010 Is it the same ti used in gen watches? A different grade? I'm looking at the Seawolf and am wondering about the quality. If anyone can shed some light on the subject I would appreciate it. No one? Link to comment Share on other sites More sharing options...
Bike Mike Posted August 27, 2010 Report Share Posted August 27, 2010 More then likey it is a different grade then the Gen. You have to remember that the rep factories are going to use what they can get their hands on and are the least bit concerned about using Gen spec. Ti. If you do a search for 316 or 316L you can read my metallurgical testing about how the watch I tested was not "316 Stainless Steel" as our dealers state. Link to comment Share on other sites More sharing options...
andreww Posted August 27, 2010 Report Share Posted August 27, 2010 More then likey it is a different grade then the Gen. You have to remember that the rep factories are going to use what they can get their hands on and are the least bit concerned about using Gen spec. Ti. If you do a search for 316 or 316L you can read my metallurgical testing about how the watch I tested was not "316 Stainless Steel" as our dealers state. With the current versions of the Chrono Avenger & Seawolf (ti version) the quality of the ti should be the least of your worries. Link to comment Share on other sites More sharing options...
Prsist Posted August 27, 2010 Author Report Share Posted August 27, 2010 With the current versions of the Chrono Avenger & Seawolf (ti version) the quality of the ti should be the least of your worries. In your opinion what is the most accurate breitling chrono rep going? I'm looking at getting a gen Skyracer (I know they dont make a rep) but a CA is close to size and weight. So I want to try a rep similar to decide on the gen. Link to comment Share on other sites More sharing options...
Bike Mike Posted August 28, 2010 Report Share Posted August 28, 2010 With the current versions of the Chrono Avenger & Seawolf (ti version) the quality of the ti should be the least of your worries. No doubt....we should be lucky we are even seeing Ti on these models. In your opinion what is the most accurate breitling chrono rep going? I'm looking at getting a gen Skyracer (I know they dont make a rep) but a CA is close to size and weight. So I want to try a rep similar to decide on the gen. A CA close the to size and weight or a Skyracer? Size yes...Weight...not with a CA being Ti...they are much lighter. Look more at a SOSF as they are just 1mm smaller, but are very close in weight...of course if any of our dealers still have SOSF available. Link to comment Share on other sites More sharing options...
andreww Posted August 28, 2010 Report Share Posted August 28, 2010 No doubt....we should be lucky we are even seeing Ti on these models. A CA close the to size and weight or a Skyracer? Size yes...Weight...not with a CA being Ti...they are much lighter. Look more at a SOSF as they are just 1mm smaller, but are very close in weight...of course if any of our dealers still have SOSF available. Agreed, the Steelfish is very close in diameter and depth, and is only about 2 grams heavier than the Skyracer. The titanium breits feel like they are made of plastic when you first pick them up, soooo light. Link to comment Share on other sites More sharing options...
Prsist Posted August 28, 2010 Author Report Share Posted August 28, 2010 Agreed, the Steelfish is very close in diameter and depth, and is only about 2 grams heavier than the Skyracer. The titanium breits feel like they are made of plastic when you first pick them up, soooo light. The diver? Which color dial is most accurate? Is the a chrono that is close to the dimensions of the skyracer? Ever think we willed will see a movt similar to the lemania 5100? Central chrono minute hand? Link to comment Share on other sites More sharing options...
Prsist Posted August 28, 2010 Author Report Share Posted August 28, 2010 Agreed, the Steelfish is very close in diameter and depth, and is only about 2 grams heavier than the Skyracer. The titanium breits feel like they are made of plastic when you first pick them up, soooo light. That's why I like Ti, so lightweight on my 6.25" wrist. I'm narrowing my collection parameters down. I'm starting to find out what I appreciate and what I will actually wear. If it isn't Ti it just doesnt work. Now there are exceptions such as possibly the Skyracer or a Dinner 657 diver. Link to comment Share on other sites More sharing options...
hackR Posted September 2, 2010 Report Share Posted September 2, 2010 Owning a gen ti Aerospace, i would say that the old skool ti CA and Seawolf are close...not the same, but only under really close inspection can you see that the ti on the reps are less pure...you can see it too under close macro shots... i've handled and worn the gen ti Seawolf...thick beast...yet light...i think 1/2 the weight is in the darn thick crystal... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now