CG for pvd pam

[pybu15]

Hello everyone,

I am looking for the perfect Crown guard for a pam 026. The difficulty is to source a nice PVD CG and have it reversed for a destro watch. Any ideas on where to look?

Regards.

PYB.

[Watchmeister]

Try Davidsen. Remember that even if you find one the tricky part is matching up the PVD. Of course if the CG needs any work you most likely will have to coat or re-coat the PVD.

[tenerife]

if you want a "perfect" one i think it

[PeteM]

Dont try reversing a standard CG if you want perfect mate or rather best version.

Best to try a WTB they are hard to find especially A-F series. You will get the K series off DSN but not A-F series he always had his CGs upside down on his 26B. If it is a K your after I have not seen a good destro version especially with correct RB lever.

I agree that best thing is to get the case and CG recoated for a proper job if you can find one. I gave my last one away to a good friend

Is it a rep build you have already or are you planning to build if the first one then where is it from try going back to them in first instance. If its a build then I would suggest the chances are you case has incorrect PVD for 26 if its from a rep source whether its a 26 A or B or a K. And if its a K I would suggest its not worth the effort as the dials are awful

[tridad]

Hello everyone,

I am looking for the perfect Crown guard for a pam 026. The difficulty is to source a nice PVD CG and have it reversed for a destro watch. Any ideas on where to look?

Regards.

PYB.

Try Jackson Tse on RG, I have one on the way>

Cheers!!

[panto911]

hard find....