urbanshogun Posted May 2, 2011 Report Share Posted May 2, 2011 Hey guys, I unscrewed the CG on my 177l to grease the crown gasket. However, when I went to reattach the CG, the screws just turn and turn with no resistance, as if the threading in the case is no longer there. Is there any way to fix this without buying another case? Quote Link to comment Share on other sites More sharing options...
rsea Posted May 2, 2011 Report Share Posted May 2, 2011 Loctite red Quote Link to comment Share on other sites More sharing options...
StormTooper4 Posted May 2, 2011 Report Share Posted May 2, 2011 One of the Joys of titanium i'm afraid , Loctite glue is the quickest and easiest option, or maybe some Steel screws might be an option worth pursuing. You could re tap the holes with slightly larger screws but you may need to widen the holes in the CG which isnt easy . Good luck hope someone can offer some alternative advice Quote Link to comment Share on other sites More sharing options...
urbanshogun Posted May 2, 2011 Author Report Share Posted May 2, 2011 I tried loctite, but when I close the lever one side or another just goes out from the case a little, so it is imperfect and wobbly. Worst comes to worst I can send it back to the dealer and he will try and get the factory to fix it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.