trackpack Posted May 25, 2011 Report Share Posted May 25, 2011 Hi guys, just thought Id share a quick story. So I've had my 5k for a few months now and have to say I love it, it rarely isnt on my wrist. She goes with all forms of attire aswell as all my moods anyways I've yet to have a reason to bad talk my prized 5k, and yes the movement was loud but actually very accurate so far.....untill last night. So I get home from a friends birthday dinner and take off my 5k for the evening. I'm about ready to go to bed but decide to go grab the watch off the counter and put it away. I notice that it was about a half hour behind and whats this......no tic tock. Well I must have forgotten to wind her. So I proceed to wind but no success, I decide to give her a smack....nothing. The hands move freely with the crown pulled, and she winds fine with the crown in. Hmmmmm...........I dash to the garage to grab the duct tape, wad a ball and twist the back off. Obviously at this point the balance wheel is at a stand still(slight bounce back and forth), so i decide to gently give her a nudge.....she moves freely! I pull the escapement and move the pallet back and forth and sure enough the gear train moves as it should, so I look at the balance wheel and what do I find......no impulse stone .......well thats the end of this movement So is the sea-gull 3600 still the weapon of choice or is it preferred to go eta? Also on a side note, there were NO movement hold down screws and tabs in my watch! LOL Those crazy Chinese. Link to comment Share on other sites More sharing options...
gianton Posted May 25, 2011 Report Share Posted May 25, 2011 I had both movements on my 005K & 026K changed with this high beat A6497-2 Seagull movement, both running strong about 2 weeks now with +-7 sec/day and very quiet. Link to comment Share on other sites More sharing options...
Vlad1980 Posted May 25, 2011 Report Share Posted May 25, 2011 ^ Did you change them yourself or have a watch smith do it? Link to comment Share on other sites More sharing options...
gianton Posted May 25, 2011 Report Share Posted May 25, 2011 My local watchsmith did it in less than an hour for both. Link to comment Share on other sites More sharing options...
trackpack Posted May 25, 2011 Author Report Share Posted May 25, 2011 I just ordered that same seagull from getat. Hopefully it treats me better than the original did. Link to comment Share on other sites More sharing options...
relaxman Posted May 25, 2011 Report Share Posted May 25, 2011 I had both movements on my 005K & 026K changed with this high beat A6497-2 Seagull movement, both running strong about 2 weeks now with +-7 sec/day and very quiet. Same here Link to comment Share on other sites More sharing options...
mambo Posted May 26, 2011 Report Share Posted May 26, 2011 My 005 also has a new high-beat ... from Getat Running just fine and is nice and quiet, my 177 has a 111J movement for the same reason. Link to comment Share on other sites More sharing options...
trackpack Posted May 26, 2011 Author Report Share Posted May 26, 2011 Awesome thanks for the replies guys. I might get one of seads new high beat movements as well for comparisons sake. Link to comment Share on other sites More sharing options...
greekgod Posted May 27, 2011 Report Share Posted May 27, 2011 Hello trackpad, If you go through some post a few days earlier posted by me you will see I have the exact same problem, I supposed u put it down better than I did. And i was advised exactly the same thing by other members. Seagull from Getat. Its just that I spoke to Andrew today from whom I had purchased the watch and he said the moment in the new PN318 K can not be changed at all!! does any one know anything about this?? Regards Link to comment Share on other sites More sharing options...
justaguy88 Posted May 27, 2011 Report Share Posted May 27, 2011 Hello trackpad, If you go through some post a few days earlier posted by me you will see I have the exact same problem, I supposed u put it down better than I did. And i was advised exactly the same thing by other members. Seagull from Getat. Its just that I spoke to Andrew today from whom I had purchased the watch and he said the moment in the new PN318 K can not be changed at all!! does any one know anything about this?? Regards Well this can't be true because I just swapped the movement in my 318 for an eta. Link to comment Share on other sites More sharing options...
gianton Posted May 27, 2011 Report Share Posted May 27, 2011 Hello trackpad, If you go through some post a few days earlier posted by me you will see I have the exact same problem, I supposed u put it down better than I did. And i was advised exactly the same thing by other members. Seagull from Getat. Its just that I spoke to Andrew today from whom I had purchased the watch and he said the moment in the new PN318 K can not be changed at all!! does any one know anything about this?? Regards What he meant was that you will loose the warranty. Of course it can be changed I had mine changed to a high beat. Link to comment Share on other sites More sharing options...
greekgod Posted May 27, 2011 Report Share Posted May 27, 2011 Thx guysso I am sure it can be changed...Ill go buy one and hope you too trackpad Link to comment Share on other sites More sharing options...
crazy Posted May 31, 2011 Report Share Posted May 31, 2011 there's a possibility that the dial loosened up from the movement and is pressing against the seconds hand. I have this suspicion due to the fact that you mentioned that the mounting tabs were not present, it could've caused movement play in the case. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now