AsiadeCuba Posted June 20, 2011 Report Share Posted June 20, 2011 ok guys i have an old v2 ceramic gmt ii... im looking to get the v3... the bezel is the biggest give away on the v2... where can i find a modded one with lume, ar'ed cyclops? should i just start from scratch? Quote Link to comment Share on other sites More sharing options...
sneed12 Posted June 20, 2011 Report Share Posted June 20, 2011 Build it yourself is probably the best option. I've been working on my GMT IIc for more than a year, and it's still not done. I doubt you'll find a fully modded piece ready to go. Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted June 21, 2011 Report Share Posted June 21, 2011 For inspiration: Klick. Quote Link to comment Share on other sites More sharing options...
AsiadeCuba Posted June 21, 2011 Author Report Share Posted June 21, 2011 wow wow wow! i need one of those! so the base model is the ultimate ones the trusted dealers are selling? Quote Link to comment Share on other sites More sharing options...
watch.aholic Posted June 21, 2011 Report Share Posted June 21, 2011 For inspiration: Klick. Great looking GMT there mate.... The AR on the cyclops...is it on both the sides or just under the cyclops....and is there any AR on the crystal too, on either side? Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted June 21, 2011 Report Share Posted June 21, 2011 The gen has AR applied to the crystal under the cyclops. No AR anywhere else. (You can AR the crystal, glue the cyclops on and then strip the AR again.) Quote Link to comment Share on other sites More sharing options...
AsiadeCuba Posted June 21, 2011 Author Report Share Posted June 21, 2011 wow that sounds tedious. cant you just ar the cyclops? Quote Link to comment Share on other sites More sharing options...
sneed12 Posted June 21, 2011 Report Share Posted June 21, 2011 I just installed AR'ed cyclops on mine. Look for a pictorial in a couple of days. Quote Link to comment Share on other sites More sharing options...
freddy333 Posted June 21, 2011 Report Share Posted June 21, 2011 Read this Quote Link to comment Share on other sites More sharing options...
watch.aholic Posted June 22, 2011 Report Share Posted June 22, 2011 (edited) Read this Freddy333 mate...sorry but I am a bit confused...did you AR the outside of the crystal just under the cyclops or did you AR the inside of the crystal under the cyclops? Edited June 22, 2011 by watch.aholic Quote Link to comment Share on other sites More sharing options...
freddy333 Posted June 22, 2011 Report Share Posted June 22, 2011 we sent them an aftermarket crystal (purchased from a well-known/reliable ebay seller) with instructions to AR the underside of the crystal below the cyclops Unfortunately, other things have come up that will delay me from being able to spend much time on this for the next week or 2, but I will try to get the lab to do a 2-side AR treatment & report back the results. Because, as was explained in the post, the AR material will not stand up to UV or other adhesives/cements, the next step will be to apply AR to the top (outer) face of the cyclops (in addition to the underside of the crystal below the cyclops). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.