How to remove the bracelet on Pam329L ultimate

[dvn]

It sounds like a newbie question but i could not figure it out. I want to use it with the rubber strap sometime to make it a Pam320L instead.

Thanks

[Mickey Padge]

Don't you just press the button and push the bar through the case with a tooth pick or something?

[pabler]

Yes, with a toothpick press the release button while you press the springbar with another one. It can be difficult the first times, but once you've managed it it's as easy as to sew and sing (that's a direct translate from spanish, I know)

[RickHiC]

In my experience, I had to push the buttons pretty darn hard (harder than a toothpick would allow), and then push the pin to the side very very hard. After the first change it got easier, but it's still quite a pain. I don't know, maybe I'm doing something wrong. I'd like to know, as I enjoy swapping bracelet/strap on my 236 and straps on my 359.

[dvn]

So it is the same way the bracelet on the iwc watches is removed. I am going to try when i get home. Thank you all for your help.

Edit: Do i need a new set of pins to mount the rubber strap or does it work with the exsiting pins from the bracelet?

[Mickey Padge]

Same pins, just need good quality tubes on the strap, too large/loose tubes will create a rattle, hopefully the tubes you have will be a snug fit

[thegrizz]

just push the release buttons on the bottom side of the case, you might have to push the pin from the side at the same time. the pins should pop out pretty easy.

[yamaha5ch]

Greeting to everyone

it's my first post.......

you can see how to change pam straps searching on youtube "Panerai Strap Change System Difference "

enjoy!

[dvn]

Thank you all.