redwatch Posted August 19, 2011 Report Posted August 19, 2011 If anyone has the info for the correct stem for the 7734 it would be greatly appreciated! Also anyone know of a good source for a movement ring for the DW 7032 kit? Thanks!
HauteHippie Posted August 19, 2011 Report Posted August 19, 2011 On 8/19/2011 at 9:31 PM, redwatch said: If anyone has the info for the correct stem for the 7734 it would be greatly appreciated! Also anyone know of a good source for a movement ring for the DW 7032 kit? Thanks! Is this it? http://www.ebay.com/itm/Valjoux-caliber-7734-winding-stem-watch-part-/270668478267 Possibly contact The Zigmeister about fabbing a ring.
redwatch Posted August 19, 2011 Author Report Posted August 19, 2011 On 8/19/2011 at 9:41 PM, chieftang said: Is this it? http://www.ebay.com/itm/Valjoux-caliber-7734-winding-stem-watch-part-/270668478267 Possibly contact Ziggy about fabbing a ring. Thanks Chief! I'm not sure actually. I remember reading somewhere that there were two different options for it (of course I could be completely confused about that) I should have had Zig make me a ring while he had the movement for service
krpster Posted August 20, 2011 Report Posted August 20, 2011 You are correct. There are two sizes for the 7734 stem. The one you need is a tap 10 IIRC. Ofrei has them for about $6.
redwatch Posted August 20, 2011 Author Report Posted August 20, 2011 On 8/20/2011 at 2:48 AM, krpster said: You are correct. There are two sizes for the 7734 stem. The one you need is a tap 10 IIRC. Ofrei has them for about $6. Is it a 0.90 tap or 1.20?
ubiquitous Posted August 20, 2011 Report Posted August 20, 2011 Shouldn't need amovement ring for a 7031/2 build. Just movement tabs...
krpster Posted August 20, 2011 Report Posted August 20, 2011 On 8/20/2011 at 4:57 AM, redwatch said: Is it a 0.90 tap or 1.20? Sorry. Should have clarified. Tap 10 = 0.90mm Here is size table for stems. Very handy Tap Table
mrboombasteke Posted August 20, 2011 Report Posted August 20, 2011 Red--you may find some info here useful:
redwatch Posted August 20, 2011 Author Report Posted August 20, 2011 On 8/20/2011 at 1:06 PM, mrboombasteke said: Red--you may find some info here useful: Brilliant! Thanks for that!!!!! @Ubi - thanks for the case shot. That helps immensely!
redwatch Posted August 20, 2011 Author Report Posted August 20, 2011 On 8/20/2011 at 11:58 AM, krpster said: Here is size table for stems. Very handy Bookmarked Thanks!
redwatch Posted August 27, 2011 Author Report Posted August 27, 2011 On 8/20/2011 at 5:48 AM, ubiquitous said: Shouldn't need amovement ring for a 7031/2 build. Just movement tabs... Hey R.... any idea on the thread size for the screws that hold down the movement tabs? I have the tabs, but my collection of screws are all for ETA movements. Also any idea on a source?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now