projectologist Posted February 13, 2012 Report Share Posted February 13, 2012 Just had the lever left to do and getting the right snap when closed proved more challenging than anticipated. The spring in DSN's newborn crown is way too stiff, so it took more trial fits than I've ever needed before doing this mod. But it's all good now and I is very happy with the results. Some quick phone pics for now, will save the formal pics for when I have the other Pre-V build done that I'm doing for another member. Same parts list, should be an interesting pair Bigtime thanks to w0lf for the Pre-V project case he has offered to the community. And for all of the answers to my endless stream of questions like howTF am I supposed to make this fit and get the right finish or WTF is it suppose to look like??? Thanks to SERGEANT_AT_ARMS for the FGD hands and lume application. Thanks to FGD for the awesome dial and Tamiya for the perfect clear coat Matt/BigCrown C3 crystal, sits just right with a near perfect side profile. No AR and xtal clear. Thanks to the maniac that produced a small batch of these killer CG's. Total PITA to finish and I loved every minute of it Jakob case back, 'nuf said Total parts list and all mods when I post detailed pics of both watches. Here's the chain saw blade sharpener w0lf suggested for shaping curve shapes (highly recommended!!!). I had quite a bit of lever tip to remove before it would close. Finally on the wrist. I like where w0lf set the crown tube, spacing is just right... Love the polished rehaut... I almost deleted this next pic from my phone as it wasn't as sharp as I like plus the lighting sucked. But when I saw how it had a similar look to the gen pics I have in my reference folder, I thought I'd include it here for comparison. Why is it you never notice the dust until you see your pics??? Project... Gen... More gen pics I used for reference, focusing on the CG and lever pin... Link to comment Share on other sites More sharing options...
wengsy Posted February 13, 2012 Report Share Posted February 13, 2012 Grea job on the CG. It looks spot-on to gen. Link to comment Share on other sites More sharing options...
Watchmeister Posted February 13, 2012 Report Share Posted February 13, 2012 Very nice. Wear it well. Link to comment Share on other sites More sharing options...
dluddy Posted February 13, 2012 Report Share Posted February 13, 2012 Stunning Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
jbetts1790 Posted February 14, 2012 Report Share Posted February 14, 2012 Nice work, looks great! Link to comment Share on other sites More sharing options...
lfovco Posted February 15, 2012 Report Share Posted February 15, 2012 That looks really nice!!! Great job!!! Link to comment Share on other sites More sharing options...
spitfire Posted February 15, 2012 Report Share Posted February 15, 2012 epic! Link to comment Share on other sites More sharing options...
projectologist Posted February 16, 2012 Author Report Share Posted February 16, 2012 Thanks guys for all of the nice words Here's a little more regarding parts... • w0lf case with drilled out lugs and correct Pre-V details • DSN newborn Pre-V crown and tube • BigMatt C3 crystal • Jakkob 201/A caseback • FGD dial and hands • Same ETA movement version (with eta-choc anti-shock system) used in the gen 318 FGD dial after coating with Tamiya TS-79... awesome recessed indices/numbers... Before and after CG... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now