2crueal4u Posted February 26, 2012 Report Share Posted February 26, 2012 Hi guys. Purchased a new 390 from Kuvarsitwatch and read here about the poor CG on the watch So I found one on ebay, Will it fit on the one i purchased? http://www.ebay.com/itm/CROWN-GUARD-FOR-PANERAI-WATCH-44MM-or-47MM-POLISHED-/160619094708?pt=LH_DefaultDomain_0&hash=item2565a4e2b4#ht_3943wt_1270 Thankls Link to comment Share on other sites More sharing options...
maxman Posted February 26, 2012 Report Share Posted February 26, 2012 Im not that familiar with the 390 base..but I think the CG's are brushed...not polished. I think It shoud fit but I would make sure about the finish. I guess you could always brush It yourself...If necessary. Mike Link to comment Share on other sites More sharing options...
2crueal4u Posted February 26, 2012 Author Report Share Posted February 26, 2012 (edited) ok! Thanx then. I will have it brushed, thats no problem. Just hope that CG and lever is good. have a gen Pam 104 to compare with. Edited February 26, 2012 by 2crueal4u Link to comment Share on other sites More sharing options...
maxman Posted February 26, 2012 Report Share Posted February 26, 2012 ok! Thanx then. I will have it brushed, thats no problem. Just hope that CG and lever is good. have a gen Pam 104 to compare with. I would ask the seller If he would take a few extra pics. It's very difficult to see If the CG lever is flush. From that second pic It looks like It may not be as flush as you might like. It seems like this is the number one problem with Pam rep CG these days. Good luck. Mike Link to comment Share on other sites More sharing options...
korneevy Posted February 27, 2012 Report Share Posted February 27, 2012 (edited) I have bought exact same crown from this seller and only received it a few days ago. This was for my E-series 113, building off the NOOB case. The CG fits really nicely, but required a bit of work to make it sit well on the case and properly closing, but after a few mins with a dremmel, all works really well. I've aged it a little and now the piece is done. Overall, better quality than any of the A-E series rep CGs I've handled myself (inc Sead's stuf). Not sure where this seller gest them but worth a try. Edited February 27, 2012 by korneevy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now