Question: Pam GMT Mod for Eta 2893-2

[rolli]

for those who have these experience,

i have to install a swiss eta 2893-2 gmt movement with original movement-retaining-ring

in a pam 029B gmt case which had installed an asia 2836 with gmt function.

the asia 2836 has a different measure than the 2893-2 movement, see image.

it's 0,25 mm difference.

the dial must get an additional 0,25 mm underlay .

is it necessary then to use H5 hand extension gears for all hands ????????

or only for the gmt hand ???????

thanks for help

rolli

[FxrAndy]

You may be able to get away with only using the GMT, hour and cannon pin if you have a long tubed seconds hand but if you dont then you will need them all H5

[rolli]

many thanks for your help.

rolli

  On 3/1/2012 at 1:59 PM, FxrAndy said:

You may be able to get away with only using the GMT, hour and cannon pin if you have a long tubed seconds hand but if you dont then you will need them all H5