mrjohan Posted March 18, 2012 Report Share Posted March 18, 2012 I'm trying to remove the stem from this movement. I've gently pushed the red circled pusher and tried to pull out the crown and stem. Nothing happens. The stem doesn't move at all. Do I do something wrong? What can I do different? By the way. Anyone know what movement this can be? Sold as an Asian 21J. It's stamped "2838". I've removed the rotor (marked "A A" and "Automatic") before taking the pic. Thanks! Link to high-res pic: http://farm8.staticf...d7ec8d4ac_o.jpg Quote Link to comment Share on other sites More sharing options...
Justasgood Posted March 18, 2012 Report Share Posted March 18, 2012 pull crown out to the setting position and then press down firmly while pulling the crown/stem out. Quote Link to comment Share on other sites More sharing options...
mrjohan Posted March 18, 2012 Author Report Share Posted March 18, 2012 (edited) Thanks for your tips! Havn't succeeded yet. Pushing the release does nothing. Have tried with other Asian 21J movements, and with them all goes fine. Will keep on trying a few more times... Edited March 18, 2012 by mrjohan Quote Link to comment Share on other sites More sharing options...
Jkay Posted March 18, 2012 Report Share Posted March 18, 2012 Sometimes you must gently turn the crown as you pull it. Do not press that button too hard (deep) or you will unhook the workings of the keyless system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.