bensonp Posted April 9, 2012 Report Posted April 9, 2012 Hi all, I'm having crown problem with one of my panerai. I can pull out the crown to adjust the time, but when I push it back in, it is loose and I can't wind the watch. Any idea what is wrong with it and what can I do? When i push the crown back in, and when I turn the crown, it doesn't wind the movement, but it adjust the time. Thanks, Benson
Harmtol Posted April 9, 2012 Report Posted April 9, 2012 It's likely that the retaining screw has become detached for the retaining plate it will proberbly need the dial and hands removing to re attach. Ore you tighten the screw and it's solved. Easy solved. It was also the case with one of my watches. Haven't done it before but it's really easy. Good luck.
krpster Posted April 9, 2012 Report Posted April 9, 2012 Agree. First step is to remove the case back and tighten the setting lever screw (aka: stem release screw). You will see it just above where the stem enters the movement. Chances are good that this will fix your problem. If not then the screw has come loose from the setting lever. In which case you will need to fix the keyless works and reinstall the screw. This requires removal of the hands and dial.
mikellem Posted April 9, 2012 Report Posted April 9, 2012 @bensonp, Which model Panerai are you having trouble with? Good Luck, MM
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now