archierocks Posted August 5, 2012 Report Share Posted August 5, 2012 hi guys i got a Yuki 1675 dial and the $38.00 gmt hand set to fit an ETA2824/2836 now i have tried about 4 movements and 2 2836-2 and none of them fit either the dial without cutting the legs or the hands the gmt goes no where near it have i been really thick and missed out on something or is it just they dont fit as yuki suggests any help would be appreciated to get this one finished the case RA did for this mocks me every morning to be finished Link to comment Share on other sites More sharing options...
FxrAndy Posted August 5, 2012 Report Share Posted August 5, 2012 sounds like he sent you the wrong parts mate Link to comment Share on other sites More sharing options...
archierocks Posted August 5, 2012 Author Report Share Posted August 5, 2012 honest this build has driven me mad lol Link to comment Share on other sites More sharing options...
JoeyB Posted August 5, 2012 Report Share Posted August 5, 2012 The gen style dial legs will not fit the ETA 28xx movements, they will have to be cut to use it. If you decide to cut the legs to use the dial, dial dots, glue or Yuki's dial legs and tutorial on his site will help. BUT, make certain that the thickness of the dial allows enough of the GMT pinion through for the GMT hand to 'bite' on. The hour, minute and second hands should fit if Yuki said they would, the Tudor hands are what is used on ETA 28xx movements. The GMT 4th hand Yuki has fits the gen at 1.7mm, and will NOT fit the converted ETA 28xx movements. I have successfully broached only one, the others broke. RafflesTime has the GMT 4th hand that will fit the converted ETA movement at 2.0mm. Yep, join the crowd who have already been driven mad by this! Link to comment Share on other sites More sharing options...
archierocks Posted August 5, 2012 Author Report Share Posted August 5, 2012 yuki says his gmt is 2.0mm but its so big it doesn't hold on at all on any of the movements the gmt hand should go on first yea since its got the biggest dia hole Link to comment Share on other sites More sharing options...
Ephry73 Posted August 5, 2012 Report Share Posted August 5, 2012 Sounds like you did receive the wrong parts. E Link to comment Share on other sites More sharing options...
JoeyB Posted August 5, 2012 Report Share Posted August 5, 2012 The 6542 and 1675 hand stack has the GMT/4th hand on the bottom. The genuine movement and ETA 2893-2 are the same, taking the 1.7mm hand. The ETA 28xx movements that are converted/modified to GMT use a 2.0mm pinion, which is the same as the DG3804B. So Yuki may have sent you the wrong one. Use a caliper and measure the GMT pinion. Link to comment Share on other sites More sharing options...
archierocks Posted August 5, 2012 Author Report Share Posted August 5, 2012 i will do i have emailed yuki but i bought them a few months ago so doubt he will do anything thansk guys maybe i should just use a diff movement rather then the eta need to go through my box see if anything fits Link to comment Share on other sites More sharing options...
archierocks Posted August 6, 2012 Author Report Share Posted August 6, 2012 Yuki got back to me says the set even tho it says fits ETA the gmt hand wont and thanked me for my purchase lol anyone got any ideas or should i just use a diff movement a DG etc Link to comment Share on other sites More sharing options...
archierocks Posted August 6, 2012 Author Report Share Posted August 6, 2012 anyone tried raffles vintage gmt for the 2836 ? Link to comment Share on other sites More sharing options...
Ephry73 Posted August 6, 2012 Report Share Posted August 6, 2012 With raffles make sure the diameter is not 29mm. Feet location was never a problem with any of his dials. E Link to comment Share on other sites More sharing options...
JoeyB Posted August 6, 2012 Report Share Posted August 6, 2012 RafflesTime should have the GMT/4th hand, large or small arrow, for the modified GMT ETA movement. Link to comment Share on other sites More sharing options...
archierocks Posted August 6, 2012 Author Report Share Posted August 6, 2012 he does but then yuki said his would fit lol and they dont gonna order the 2 from raffles Link to comment Share on other sites More sharing options...
archierocks Posted August 6, 2012 Author Report Share Posted August 6, 2012 wait i think i have worked it out the 4 movements are just standard they have not been modified the gmt function would that make sense Link to comment Share on other sites More sharing options...
JoeyB Posted August 6, 2012 Report Share Posted August 6, 2012 See reply #4. The only ETA movement that is a designed GMT movement is the ETA 2893-2, which takes the same size GMT/4th hand, 1.7mm, as the genuine Rolex 6542 and 1675 movements. All the other ETA movements that have a GMT function are modified to be GMT. Measure the GMT pinion. If it measures 2.0mm then you need the GMT hand that fits the DG3804B/ETA 2836-2 - ETA 2646 movements. Link to comment Share on other sites More sharing options...
archierocks Posted August 7, 2012 Author Report Share Posted August 7, 2012 thanks joey have ordered all the hands totally overlooked the fact the movement could be wrong Link to comment Share on other sites More sharing options...
archierocks Posted August 8, 2012 Author Report Share Posted August 8, 2012 nope movement was right spoke to yuki hes sending out a new set of hands free to me says he thinks he knows the problem Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now