janeto72 Posted September 7, 2012 Report Share Posted September 7, 2012 Based on the handful of late-model 6263s I've seen? Pretty much indistinguishable. I raised a concern earlier that the Phong-Thin might have slimmer lugs than a gen. I would have to see them side-by-side, I think. I agree....i measured it up to a gen and it's on the money.Late model 6263 case.The lugs are perfect,The only thing I don't like is that the lug holes for the spring bars need to be about 1mm further towards the end of the lugs to accomodate gen 571 endlinks.With a little massaging of the case you can get gen endlinks to fit perfectly.... Quote Link to comment Share on other sites More sharing options...
gimme Posted September 8, 2012 Report Share Posted September 8, 2012 J: what does your case measure from tip to tip? ~43mm? I didn't get to measure it before shipping it to you. Quote Link to comment Share on other sites More sharing options...
kikinz Posted March 11, 2014 Report Share Posted March 11, 2014 Need help guys , I just took my movement 726 from Certina DS2 (valjoux 726 ) and put this movement in Phong 's case , some how the stem (winding ) is a bit too long so i would like to know which is the correct size to fit Phong 's case . everything else i just perefct movement fit in nicely . but somehow the stem line is a bit longer than the standard one. so please help me for the Info . THank Quote Link to comment Share on other sites More sharing options...
cc33 Posted March 11, 2014 Report Share Posted March 11, 2014 Have a watchmaker cut it to size.. Quote Link to comment Share on other sites More sharing options...
kikinz Posted March 12, 2014 Report Share Posted March 12, 2014 THank you so much indeed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.