rongotti Posted December 24, 2012 Report Share Posted December 24, 2012 (edited) So I was showing a friend my watch and telling him it was a rep and he says "I think something is missing" pointing to the threaded stem at the 10 O'clock position. Great I've had it three days and already lost the piece that goes on there. What do I do from here? Sent from my DROID4 using Tapatalk 2 Edited December 24, 2012 by rongotti Link to comment Share on other sites More sharing options...
the_rymeister Posted December 24, 2012 Report Share Posted December 24, 2012 Hi buddy where are you located ? And is that a 42mm or 45mm? I have a spare 45mm case with hev and crown. Let me know if you need it Link to comment Share on other sites More sharing options...
rongotti Posted December 24, 2012 Author Report Share Posted December 24, 2012 (edited) Thanks for the quick response, I am in Florida it is a 42mm though :-( would my band fit the 45MM? Sent from my DROID4 using Tapatalk 2 Edited December 24, 2012 by rongotti Link to comment Share on other sites More sharing options...
jtiis Posted December 25, 2012 Report Share Posted December 25, 2012 Sorry... no piece on earth for you this Christmas. 1 Link to comment Share on other sites More sharing options...
vandal.tbh Posted December 26, 2012 Report Share Posted December 26, 2012 Sorry... no piece on earth for you this Christmas. Hilarious.. But Rongotti, that's a $66 replacement for the gen He release vale at Ofrei: http://www.ofrei.com/page989.html#13940 Link to comment Share on other sites More sharing options...
ryaku Posted December 26, 2012 Report Share Posted December 26, 2012 You just need to find a HV replacement and you are good to go. Start a WTB thread and I am sure someone will come up with the spare part you need. No need to replace anything else, it would be better though to open the case and put some epoxy to be sure not to lose the hv once again (also, to be sure there-s no leakage). 1 Link to comment Share on other sites More sharing options...
rongotti Posted December 26, 2012 Author Report Share Posted December 26, 2012 You just need to find a HV replacement and you are good to go. Start a WTB thread and I am sure someone will come up with the spare part you need. No need to replace anything else, it would be better though to open the case and put some epoxy to be sure not to lose the hv once again (also, to be sure there-s no leakage). I looks like the crown just screws onto the threads on the watch stem, can I just put some super glue on the threads and tighten this new one down? I emailed Josh and he said he can send me a new crown for it. But I would need to install it and glue it. Sent from my DROID4 using Tapatalk 2 Link to comment Share on other sites More sharing options...
vandal.tbh Posted December 27, 2012 Report Share Posted December 27, 2012 Superglue won't do the trick, but epoxy (like ryaku recommended) will work. You can get epoxy almost anywhere. Link to comment Share on other sites More sharing options...
rongotti Posted December 27, 2012 Author Report Share Posted December 27, 2012 Hmmmm I hope I don't eff this up :-( Sent from my DROID4 using Tapatalk 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now