Watch case/winder question

[rongotti]

Ok so I assume that most of us have a nice watch case/winder. I have one with 4 winders and holds 12 watches total. I got a great deal on it and couldn't be happier. I do however have one huge issue, all of my bracelets are too big and the roll and get scratched up. How do you solve this conundrum? Sent from my DROID4 using Tapatalk 2

[freddy333]

I place a folded bit of soft paper toweling between the cushion & watch head to take up the slack. Orient each watch with their crowns on the outside just in case 1 of them slips off. Works like a charm

[sgtguk]

Mine is a similar solution, I used sticky back velcro strip (soft side) on the underside of the cushions to bulk it out a little and it works a treat   just work out how long you need the velcro first and try it on the cushion 'dry' with a watch, then when your happy with the fit peel off the adhesive side and stick it to the cushion, you probably wont see much if any of the velcro either    stops them flopping around and like freddy says always put the crowns facing away from each other

Edited December 30, 2012 by sgtguk