rongotti Posted December 29, 2012 Report Share Posted December 29, 2012 Ok so I assume that most of us have a nice watch case/winder. I have one with 4 winders and holds 12 watches total. I got a great deal on it and couldn't be happier. I do however have one huge issue, all of my bracelets are too big and the roll and get scratched up. How do you solve this conundrum? Sent from my DROID4 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
freddy333 Posted December 30, 2012 Report Share Posted December 30, 2012 I place a folded bit of soft paper toweling between the cushion & watch head to take up the slack. Orient each watch with their crowns on the outside just in case 1 of them slips off. Works like a charm Quote Link to comment Share on other sites More sharing options...
sgtguk Posted December 30, 2012 Report Share Posted December 30, 2012 (edited) Mine is a similar solution, I used sticky back velcro strip (soft side) on the underside of the cushions to bulk it out a little and it works a treat just work out how long you need the velcro first and try it on the cushion 'dry' with a watch, then when your happy with the fit peel off the adhesive side and stick it to the cushion, you probably wont see much if any of the velcro either stops them flopping around and like freddy says always put the crowns facing away from each other Edited December 30, 2012 by sgtguk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.