Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

problems with pam 111 and pam 061: loading wheels


Recommended Posts

Posted

hello all from italy...

ive bought the 2 panerais some months ago from a china reseller...

all fine until some weeks ago, when both watched present the same problem:

 

the loading wheel does not load more the movement and dont change the hours.

 

making them see from a friend (watch-repairer), we opened and he told me there is the loading wheel broken internally...

 

the tige seems fine, as the movement itself..

 

so, im without working watches....

 

someone of you experienced this kind of problem?

can you confirm to me that is properly the loading wheel broken?

 

 

how can i solve?

 

 

txs a lot

Lorenzo

post-52474-0-68224900-1363270129_thumb.j

post-52474-0-67535400-1363270145_thumb.j

Posted

I have no idea what a loading wheel is but if you can't wind the watch anymore it is likely to be a keyless, winding or click wheel issue.

Mark

Posted

Dito above it sounds to me (from what i undertand loading wheel to mean the crown) from what you describe with the hand setting that the keyless works ir the stem is snapped, but if your friend is a watch repairer (or does he just change batterys in quartz watches) then any thing on these movements is reletivly easy.  if you realy strugle to find some one to work on them then get in touch i am in germany.

Posted (edited)
 

thanks, yes i mean the crown.

in standard position closed (fully pressed in) all is fine.

then , when you open the lever, you can load the movement; pulling again you can set hour/mins.

 

its this:

 

 

hope can be clear...

 

i simply noticed that the the crown does not engage the movement, so its impossible to change hours/min and load the movement.

 

the friend of mine unfortunally has not spares and said to me that ive to find a new crown, in order to replace it....

 

Dito above it sounds to me (from what i undertand loading wheel to mean the crown) from what you describe with the hand setting that the keyless works ir the stem is snapped, but if your friend is a watch repairer (or does he just change batterys in quartz watches) then any thing on these movements is reletivly easy.  if you realy strugle to find some one to work on them then get in touch i am in germany.

Edited by lo1700
Posted

sorry, i cant clearly understand your tip...

 

if you mean to try to tighten or un-tighten a bit the tige inside the crown, we have already tried.....max, min, half....

 

no solution...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up