BeefSteak Posted March 30, 2013 Report Share Posted March 30, 2013 Hello gents, I recently purchased a Pam 288 from Toro, it is a beautiful watch but one thing in particular caught my attention. I have not handled the gen of this model but by looking at the pictures found online of both reps and gens I noticed that the chrono subdial has a more matte finish to it. The subdials on my rep are more shiny and tend to reflect light regardless of the angle. I tried to use the search option but it appears no one has addressed this issue in the past. Any input is much appreciated. Link to comment Share on other sites More sharing options...
kbh Posted March 30, 2013 Report Share Posted March 30, 2013 Is it the new model 288 and not the original A7750? That one supposedly has many flaws. Link to comment Share on other sites More sharing options...
BeefSteak Posted March 30, 2013 Author Report Share Posted March 30, 2013 It is the A7750 model, I'll take a picture in a sec.... Link to comment Share on other sites More sharing options...
BeefSteak Posted March 30, 2013 Author Report Share Posted March 30, 2013 Sorry not the best picture... Link to comment Share on other sites More sharing options...
PeteM Posted March 31, 2013 Report Share Posted March 31, 2013 Its a common issue with H maker subdials.... if you notice there auto stuff like say the new 299N it has that satin finsih to the subdial It is a flaw mate... you can look to matt lacquer the dial I have done it before and it helps but never gets that gen look properly up close The original V1 288K with 7750 has the correct subdial..so I am guessing its a mnufacturing consequence with thier newer dials/ dial maker.. The newer version 288K comes with 2 different movements the 7750 is one but both have the same sort of flaws... most notably the case edges as you look at it side on its too flat at the point where corner meets lug edge side...then there is the crown and logo again its wrong shape and size..the distance of wires from case etc etc I think H maker must have used another subcontracted maker for some of those parts..but couldnt say why? Overall the newer versions of 288K isnt a patch on the V1.... Link to comment Share on other sites More sharing options...
kbh Posted March 31, 2013 Report Share Posted March 31, 2013 gen: This dial appears to have the same finish as my early 288k. At least, not a noticeable difference to my eyes. Photo's taken at servicing. Link to comment Share on other sites More sharing options...
PeteM Posted March 31, 2013 Report Share Posted March 31, 2013 There are some threads on RG etc looking at these V2 288K KBHs is throwing me off given the crown and pushers... so if those havent been modded it looks V1.5 but its not the V2 as yours is Link to comment Share on other sites More sharing options...
BeefSteak Posted March 31, 2013 Author Report Share Posted March 31, 2013 Thanks for all the information guys.. I guess you learn something everyday hehe I was not aware they had different versions of this watch. Am a bit disappointed as the quality deteriorated over time, but price climbed up. Link to comment Share on other sites More sharing options...
mumum Posted March 31, 2013 Report Share Posted March 31, 2013 Glad I still have the V1. It definately needs a service though as the movement stalls. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now