Dw Pushers

[Heywood]

I've got this DW Daytona that I'm trying to fix up and I've run up on a problem. The pushers on the watch had some nicks on them and I decided to replace them. I got 2 new aftermarket Daytona pushers from Ofrei to replace them with, but the thread pitch is different. After hosing one of the new $42 replacement pushers I did a little research and found out that the aftermarket pushers are .20 pitch, but the holes on the DW case are tapped to .25 pitch. After searching the web for a tap that is 2.5mm x .20mm to re-tap the holes without any luck I decided to come to the board for some help. There are generic pusher available that I've found with the correct dimensions, but they are not the correct screw down Daytona style. Does anybody know where I can get either a pair of DW pushers or a 2.5 x .20mm tap. Thanks!

[cls]

I've got this DW Daytona that I'm trying to fix up and I've run up on a problem. The pushers on the watch had some nicks on them and I decided to replace them. I got 2 new aftermarket Daytona pushers from Ofrei to replace them with, but the thread pitch is different. After hosing one of the new $42 replacement pushers I did a little research and found out that the aftermarket pushers are .20 pitch, but the holes on the DW case are tapped to .25 pitch. After searching the web for a tap that is 2.5mm x .20mm to re-tap the holes without any luck I decided to come to the board for some help. There are generic pusher available that I've found with the correct dimensions, but they are not the correct screw down Daytona style. Does anybody know where I can get either a pair of DW pushers or a 2.5 x .20mm tap. Thanks!

watch.david@gmail.com