Poping A Noobmarnier Bezel

[cib0rgman]

Can someone tell me how pop the bezel of the noobmariner, I keep trying to pry with a small knife and it will not come off.

I was wondering if this is a new design and there is a different way to remove it.

Thanks

[2005SUBMARINER]

Can someone tell me how pop the bezel of the noobmariner, I keep trying to pry with a small knife and it will not come off.

I was wondering if this is a new design and there is a different way to remove it.

Thanks

I like to use a small 1mm screw driver & gently pry it out .

dont forget to 1st cover the end link with some kind of rubber to avoid scratching the stainless steel ..

good luck ..

[cib0rgman]

I like to use a small 1mm screw driver & gently pry it out .

dont forget to 1st cover the end link with some kind of rubber to avoid scratching the stainless steel ..

good luck ..

Thaks

I'll try again

[rbj69]

u need to use a bezel remover(and then u will have to get a feel for it to fanagle it off), there is not as much space in between like the older ones , so the old knife trick does not work as easily and probably it will bend , i saw where someone recently that works on them posted he bent one , so be careful with these

joe

[cib0rgman]

u need to use a bezel remover(and then u will have to get a feel for it to fanagle it off), there is not as much space in between like the older ones , so the old knife trick does not work as easily and probably it will bend , i saw where someone recently that works on them posted he bent one , so be careful with these

joe

I noticed that too, that the bezel is really close to the case si is really hard to stick something in btw, I may need to buy one of those.