cib0rgman

Now that Bergies is gone where to source this fine poducts Anyone. looking for recommendations

Bought this in 2007 first rep edition. do not ear it much, but is a work horse with ETA movement inside , needs a little of TLC

Hello, I have not hear from anyone just yet. I still would like to finish this project, but just for my own satisfaction, I find myself only wearing the same two watches out of five that i have. Let me know what part do you have. the GMT movement that I have needs service and maybe buying a new ETA GMT movement would be wasier. the problem i was having is that the Dial that is a gen one looks to small for case opening. this is an old 1655 case.

Not sure, if anyone here already asked this before. bit is it possible to replace a balance bridge and a hair spring on a VSF 3235 clone movement. the hair spring is not very reliable and the shock absorbing does not work very well on clone movements, sometimes it get out of place and stop the watch. I have to open the watch just to blow air on it so it goes back the correct place. it may not even be cost effective to do this.

look at the dealers forum

Guys, I am looking for a bag for my Girl, is finerlabels good, the website is bit weird, there is on way to message them, it looks like the website was put together in a rush. tried to message them a few times, but no response.

I just want to share a photo of my collection, very small, I decided to keep small as I never change watch. MBW1665 Gen (Mov, Crown, bracelet, endlinks) ingods dials. working He, Phon Whole Bezel, aftermarket Dome 116610 lates iteration Gen Crystal Omega Planet ocean First edition, dial relume by The Zigmeister Newest Datejust with clone movement no mods Paneraiu no mods

Thank you all. cheers

How you guys use to clean a crystal, form the inside, I do not want to remove it from the case. I tried Isopropyl alcohol, but sometimes left residue. is something else that evaporates clean Thanks Cyb

Thanks all for the replies. cheers

Hello all, I need to press fit the plexi or better say, i need press the retaining ring for MBW 1665, anyone can recommend a good cheap one from ebay that will work. thanks Cyb

Amazing built. I have the same with a 1570 movement in it and a working HE valve. cheers

Hi all, I am not very active in the forum anymore and I was going thru some of my old parts box. I completely forgot about this build that I was never able to finish. I wonder if someone here would like to give a hand and try to finish it. Movement ETA 2893-2 GMT and i also have a Chinese GMT the rest is aftermarket of course the dial is Gen, but I Think is too small for the case opening. the movement needs service and I have a few spare part for it. I started this project back in 2014 almost 10 years in the making. Let me know if you are up for a challenge

Hello all, I wonder if there someone here selling these goods. since Ken is not available anymore Thanks

I see there is not much talk here about those datejust watches with Polex clone movements. any one has any experience with these ones. i would like to hear comments about reliability. also anyone from Germany. is it still possible to receive shipments here now that the UK is off the EU, customs here is always a hassle. Thanks Cyb

Hello all. I have been away for a while, can any comment about these new Daytonas. which factory has the better at the moment cheers

I am wondering if anyone here. purchased one these ones from trusty. I would like to see pictures and maybe a review comparisson Thanks Cyb

If you are going vintage. this is what you need 😀

Sad to hear about Cathy and sad to hear is the end of Bergies. until next time hopefully Take care

Just be prepared for the long wait and slow response. He is always busy, I am lucky to live closed by only 80 km drive

Of course is. he just serviced a 1665 MBW and a Noob 116610 V 10 for me

He still works on reps

I do not Think so, i bought the watch in 2007 Sent from my SM-G975F using Tapatalk

Okay. I hope everyone do the same. Thanks for your advise Sent from my SM-G975F using Tapatalk

I did, but no luck there. I thought to post here too. @Admin feel free to delete is necessary