My first Diver delivered! (v3.5) - quicky wrist shot

[wooky492]

Guys, does anyone know the best way to add extra holes to the rubber strap? I will order a genuine small one, but for now I need a quick fix.

Powerdrill perhaps?? ;-)

Sent from my GT-N7100 using Tapatalk 2

[Inertiadrifter]

The difference between noov V3 and V3.5 is the near colorless AR'ed cyclops.

V2 is totally different factory and needs to be modded to be good but not as good as the V3 and V3.5

Hope this helps

[apcollector]

wooky, I used a flat head screw driver and heated it over the hob. I then pushed it hard into the rubber and it worked. It did not leave a clean hole though, but is good enough for now.

[wooky492]

wooky, I used a flat head screw driver and heated it over the hob. I then pushed it hard into the rubber and it worked. It did not leave a clean hole though, but is good enough for now.

Wow That's brilliant! I hope it did not melt too much rubber on the exterior though ;-)

Sent from my GT-N7100 using Tapatalk 2

[apcollector]

None of the rubber melted. The straps must be heat/flame resistant to a high temp or something

[wooky492]

None of the rubber melted. The straps must be heat/flame resistant to a high temp or something

That's awesome! By the way, how's the lume on your diver. Mine seems to fade a bit within a very short period of time. Even when I've recharged it under a direct sunlight it is not that great. I definitely need a new super-lume job!!

Sent from my GT-N7100 using Tapatalk 2

[chrima]

How's the AR on your diver? Looks a bit blueish or is it due to the fact that you have blue sky and sun (which is not very common very I'm from;) )

[apcollector]

That's awesome! By the way, how's the lume on your diver. Mine seems to fade a bit within a very short period of time. Even when I've recharged it under a direct sunlight it is not that great. I definitely need a new super-lume job!!

Sent from my GT-N7100 using Tapatalk 2

The lume isn't good on mine either and it does fade quite quickly, as compared to my other reps. Nearly all the v3.5's i've seen have sloppy lume jobs.  

[wooky492]

How's the AR on your diver? Looks a bit blueish or is it due to the fact that you have blue sky and sun (which is not very common very I'm from;) )

The lume is green and you are right, it's the reflection of blue sky ;-)

But like I mentioned the lume is slopy. Definitely requires extra lume job.

Sent from my GT-N7100 using Tapatalk 2

[edgematic1]

lume on the gen is bad as well guys, it's all to your preferences

[wooky492]

lume on the gen is bad as well guys, it's all to your preferences

For real? I thought the gen would have really good lume... being a 'diver' watch..

Sent from my GT-N7100 using Tapatalk 2

[edgematic1]

Sorry for the bad iPhone pic but this is the gen:

Sent from my iPad using Tapatalk HD

[dhan]

i'm so getting this one...

 

what the different asian movement and the swiss ETA anyway??

 

is the swiss movement more reliable and move like butter...

when the asian slightly rough??

[wooky492]

Sorry for the bad iPhone pic but this is the gen:

Wow not bad! The v3.5 lume is probably about half compared to your gen pic.

Sent from my iPad using Tapatalk HD

Sent from my GT-N7100 using Tapatalk 2

[indywatchguy]

Swiss and Asian have the same beat rate and sweeping second hand. Swiss can be more reliable but ultimately its personal preference. I always go for the Swiss option if offered.