ceocorona Posted May 6, 2013 Report Share Posted May 6, 2013 Hello All! I wanted to briefly introduce myself. I am new to the forums and just purchased my first rep. I haven't posted much, my best friend has been the "Search" function on the forum. I am new to the watch modding hobby but not new to modding. My previous hobby was modifying cars. I just sold my 2008 BMW 335i completely built out (suspension, brakes, tune, etc). Fun car... expensive hobby. I have decided to get into a slightly less expensive hobby (I could be wrong! ha). Anyways, I just ordered my first rep (and working on my second purchase through BK). A Breitling SOFS. I have a few QC pics below and would greatly appreciate another set of eyes. I personally noticed a few things but wanted to share and see if these are "normal" rep issues or something worth working with the TD. 1. In the picture on top of the shipping form. I noticed a gap from the case to bracelet (SEL). The bottom left. 2. I noticed the 10:00 PM lume marker is oddly shaped. Maybe thats the light reflection. 3. The stamp on the clasp does not look well defined How does the rest of watch look? Again, thanks for any feedback. Quote Link to comment Share on other sites More sharing options...
watchguyoh Posted May 6, 2013 Report Share Posted May 6, 2013 This is just my opinion, but it's very hard to notice any gap on the SEL...most etchings on the back of Breits are not very deep like the gens, but no one will notice that anyway, unless you take it off to show someone...and the lume marker at 10 is just reflecting differently in the light...I would say you have a superb rep there. Quote Link to comment Share on other sites More sharing options...
ceocorona Posted May 6, 2013 Author Report Share Posted May 6, 2013 watchguyoh I appreciate the feedback. I think the only thing I am going to mention the the TD is the clasp imprint and maybe a shot with the clasp closed. Not sure if they take picture request, worth a shot. I may end up replacing the clasp anyways, if thats even possible. Thanks again! Quote Link to comment Share on other sites More sharing options...
david.the.marvelous Posted May 6, 2013 Report Share Posted May 6, 2013 The amplitude is a little high...I think you want less than 270. There's a thread in the main forum that says what the amplitude does but I think the dude that wrote it recommended you get watches with an amplitude thats less than 270... I just accepted a V2 wolf that had an amplitude of 318 and if I knew that you want less than 270, I probably would have asked for a different one. Other then that though, everything looks good to me. Quote Link to comment Share on other sites More sharing options...
watchguyoh Posted May 6, 2013 Report Share Posted May 6, 2013 I wouldn't worry about the amplitude...Most people say that the higher reading is actually ok...better to be high than low. I received my SA, and it had a reading of 324, it runs great. Most of those readings are taken after a full wind is done, and will probably settle down after a few minutes... Quote Link to comment Share on other sites More sharing options...
ceocorona Posted May 6, 2013 Author Report Share Posted May 6, 2013 Thanks for that call out. I found a few threads that talked about the amplitude. Quote Link to comment Share on other sites More sharing options...
martijnp Posted May 6, 2013 Report Share Posted May 6, 2013 This topic helped me a lot: http://www.rwgforum.net/topic/143934-how-to-read-timegrapher-results/ Don't worry about the 10 marker, the light makes it looks different This is just my opinion, but it's very hard to notice any gap on the SEL...most etchings on the back of Breits are not very deep like the gens, but no one will notice that anyway, unless you take it off to show someone.... I agree with Watchguyoh on this part Quote Link to comment Share on other sites More sharing options...
david.the.marvelous Posted May 6, 2013 Report Share Posted May 6, 2013 Marti, that's the post that I was referring to. I'm not really knowledgable on the mechanical aspect of the movement, so I was basing my knowledge off of that thread as well. This is why I advised him to ask for a different piece. Either way, I just accepted a movement with 318 so whatev =] Quote Link to comment Share on other sites More sharing options...
ceocorona Posted May 7, 2013 Author Report Share Posted May 7, 2013 My TD just responded and said that anything below 300 will result in a poor power reserve. Based on what I've been reading is that new mechanical systems produce high amplitudes and after a few minutes of use they normalize. From the watch analysis I can see the linear line isn't very long; short test. Any thoughts? I've also reached out to another dealer and requested a service quote for this piece. If I perform a service any testing presented by the TD is null, correct? I am assuming they correct any issues with the mechanics. Quote Link to comment Share on other sites More sharing options...
fitmic Posted May 7, 2013 Report Share Posted May 7, 2013 Welcome to RWG. Many of the members here will advice you to service your watch at your local watch repair dude. And to your qc pics, isn't the logo a bit more to the left than centred? Quote Link to comment Share on other sites More sharing options...
ceocorona Posted May 7, 2013 Author Report Share Posted May 7, 2013 @fitmic I am not sure, if it is I can barely tell. Thank you all for your feedback. My TD responded to my concerns and has provided additional pictures around my areas of question. The watch meets my expectation of what a rep watch should be. I just accepted the QC picture. Very excited to receive my first rep! Quote Link to comment Share on other sites More sharing options...
watchguyoh Posted May 7, 2013 Report Share Posted May 7, 2013 Glad to hear you accepted the pics...now the waiting game really begins...the anticipation is killer!! Don't forget to share some pics after your baby arrives. Quote Link to comment Share on other sites More sharing options...
ceocorona Posted May 7, 2013 Author Report Share Posted May 7, 2013 Oh yeah i can't wait to get that watch in my wrist... But in the meantime I'll have another watch to distract me. I am also expecting to receive a BK YM (gen crown and aftermarket tube) to arrive. Seeing as thats shipping within the CONUS I should see that watch arrive much sooner. I am sure I will be distracted with that until my SOSF arrives. And the addiction begins... Ha Quote Link to comment Share on other sites More sharing options...
ceocorona Posted May 14, 2013 Author Report Share Posted May 14, 2013 Just received the watch today... All I can say is WOW! I also just received my BK YM and that's equally as nice but this SOSF is impeccable. Pics later. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.