Erict719 Posted June 14, 2013 Report Share Posted June 14, 2013 The date wheel have not been remove, but its lower after changed dial. How to fix it guys? Quote Link to comment Share on other sites More sharing options...
freddy333 Posted June 14, 2013 Report Share Posted June 14, 2013 The date window in the new dial is probably offset a bit from its location on the original dial. Unfortunately, unless you have 1 of the older Rolex watches that had a press-fit (as opposed to footed) dial, your only options are to replace the original dial, buy another dial with the same date window location as your original dial or re-cut the date window in your new dial (which will likely damage the paint, requiring a complete repaint) so the date is properly centered within it. Quote Link to comment Share on other sites More sharing options...
Ticktick Posted June 14, 2013 Report Share Posted June 14, 2013 (edited) If the offset is not too much you could slightly bent the dial feet counterclockwise. But really slightly! So you are able to turn the dial some degrees into the right direction. Cheers Andi Edited June 14, 2013 by Ticktick Quote Link to comment Share on other sites More sharing options...
Erict719 Posted June 17, 2013 Author Report Share Posted June 17, 2013 Tc mention that we can tap the dial a bit to match the date.. Does TAP means bent the feet a bit? mine is a tc dial. Anyone else on same boat Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.