dvn Posted November 29, 2006 Report Share Posted November 29, 2006 Looking for some help to determine the right kind of glue to use to glue the bezel back. I just got a New Omega Seamaster Pro Chrono and the bezel came loose and fell right off as soon as i unwrap it. Thank you Link to comment Share on other sites More sharing options...
ubiquitous Posted November 29, 2006 Report Share Posted November 29, 2006 GS Hypo Cement seems to work extremely well... Link to comment Share on other sites More sharing options...
dvn Posted November 29, 2006 Author Report Share Posted November 29, 2006 thank you ubi. Does any Brick and mortar store carry them? Link to comment Share on other sites More sharing options...
thewightstuff Posted November 29, 2006 Report Share Posted November 29, 2006 ive had good success with clear nail varnish on the back. strong enough to hold down but allows the insert to be easily removed if needed. i suppose any colour would work too if you have a particular preference Link to comment Share on other sites More sharing options...
ubiquitous Posted November 29, 2006 Report Share Posted November 29, 2006 thank you ubi. Does any Brick and mortar store carry them? You can pick a tube up on the 'Bay for a couple $$ Link to comment Share on other sites More sharing options...
ajoesmith Posted November 29, 2006 Report Share Posted November 29, 2006 double sided sticky tape cut to size and stuck at about 4 or 5 points around the bottom of the bezel insert. no hassle no mess and no risk worked for me, cheap and easy. Link to comment Share on other sites More sharing options...
TJGladeRaider Posted November 29, 2006 Report Share Posted November 29, 2006 Looking for some help to determine the right kind of glue to use to glue the bezel back. I just got a New Omega Seamaster Pro Chrono and the bezel came loose and fell right off as soon as i unwrap it. Thank you I use two-part epoxy. I use a standard 2" sticky note pad as a mixing palette and use one small drop of each part mixed with one side of a tooth pick. Once mixed, I use the other sharp clean end of the tooth pick to put a tiny dot of it at six points around the bezel and I roll a thin film across the back side of the pearl. Works perfectly, never fails, and removal is still possible if you are careful. Bill Link to comment Share on other sites More sharing options...
eddhead Posted November 29, 2006 Report Share Posted November 29, 2006 Looking for some help to determine the right kind of glue to use to glue the bezel back. I just got a New Omega Seamaster Pro Chrono and the bezel came loose and fell right off as soon as i unwrap it. Thank you I use superglue which adheres well, but I have not had to remove the insert. In theory, you should be able to do so by soaking cotton in nail polish remover and working it around the bezel edge, but I have not tried to to that. Link to comment Share on other sites More sharing options...
JJFlash Posted November 30, 2006 Report Share Posted November 30, 2006 Does any Brick and mortar store carry them? In the USA I buy it cheap at my local Hobby Lobby store. It is a very common glue for arts / craft bead workers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now