[HELP] Replace crown and tube with genuine parts. uPO 45 mm

[fitmic]

I can't find the excellent genuine parts list posted here before.

I have a 45 mm Planet Ocean that stripped tubes and crowns three times, so now I'll order the genuine parts from Cousins UK instead.

Are these the correct ones?

Tube Omega 090ST1232

Crown (product code) 42184ST

I also need a few stems for ETA 2824-2 could you please find it for me at Cousins UK too?

What adheisive shall I use to fit the tube to the case? Can it be ordered from Cousins as well?

Will Loctite be fine to use with the stem and crown?

Thanks for taking time helping me out!

[fitmic]

Anyone?

[Jonny2400]

Be very careful many of the guides don't make it clear the parts listed are not for the CrPO 45.5mm

The results... can be seen in my pic (having to buy another watch)

Be very careful many of the guides don't make it clear the parts listed are not for the CrPO 45.5mm

The results... can be seen in my pic (having to buy another watch)

You can see the I have fitted the wrong crown to one of my watches, thus completely breaking it

Edited December 14, 2013 by Jonny2400

[fitmic]

In my case it is the ultimate PO that needs to be "Frankenized".

[FxrAndy]

Locktite thread lock is fine for the stem. If you have a tube that is a bit loose to the case then you want a two part epoxy

[fitmic]

Locktite thread lock is fine for the stem. If you have a tube that is a bit loose to the case then you want a two part epoxy

Thanks!

Now I just need to know that the part numbers are correct.