snaaakeey Posted February 23, 2014 Report Share Posted February 23, 2014 Hi all 1st time posting. Got my 1st rep recently (noob best version orange 45mm) and have noticed that the clock face could do with a very tiny clock wise adjustment so it is aligned to the watch case perfectly ( ie the 12 position is top dead center to the bracelet / links above). Is this doable by a noob. I'm confident I have the dexterity and access to correct tools but I don't want to wade in taking the back off and removing the hands and movement only to find it's too complicated. Any advise would be much appreciated. Many thank. t Quote Link to comment Share on other sites More sharing options...
fraggle42 Posted February 27, 2014 Report Share Posted February 27, 2014 No need to do hands off or anything complicated. Remove back, unscrew crow , loosen the movement holder fixing screws (a half or one turn only), and then you can rotate the movement slightly. Quote Link to comment Share on other sites More sharing options...
flyr Posted February 27, 2014 Report Share Posted February 27, 2014 Fraggle42 has this right! Unscrew crown. Do not remove stem! Just back off movement holder screws and gently persuade the dial into the position you want, and then re tighten movement holder screws. You can use this opportunity to grease the caseback "O" ring and stem/crown seals. Good luck! Quote Link to comment Share on other sites More sharing options...
snaaakeey Posted March 5, 2014 Author Report Share Posted March 5, 2014 man thanks guys. Was easier than I thought! Sent from my iPad using Tapatalk HD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.