vaccum Posted March 28, 2006 Report Share Posted March 28, 2006 Was winding my 111h this morning and .... CG fell-off there was a missing screw Anyone knows where to get em Link to comment Share on other sites More sharing options...
pobiga Posted March 28, 2006 Report Share Posted March 28, 2006 In first you can ask to your Dealer! Link to comment Share on other sites More sharing options...
vaccum Posted March 28, 2006 Author Report Share Posted March 28, 2006 Dealer contacted...waiting for his answer just wondering if any of you guys know where to get them or have any spare Link to comment Share on other sites More sharing options...
pobiga Posted March 29, 2006 Report Share Posted March 29, 2006 You can ask to "The Zigmeisterzumba" Link to comment Share on other sites More sharing options...
vaccum Posted March 29, 2006 Author Report Share Posted March 29, 2006 BINGO Thanks !! Link to comment Share on other sites More sharing options...
RWG Technical Posted March 30, 2006 Report Share Posted March 30, 2006 I had a bag of these, for the manual and auto models, but I have given them all away to members who needed them, so I have a few left for myself, but that's it... Sorry... RG Link to comment Share on other sites More sharing options...
Chronus Posted April 1, 2006 Report Share Posted April 1, 2006 Miner went today Link to comment Share on other sites More sharing options...
davewe Posted April 1, 2006 Report Share Posted April 1, 2006 In a similar thread somewhere else (all these boards are getting confusing) Joe recommended getting one of those eyeglass repair kits. I grabbed one from the drug store for a couple bucks. It came with 3 or 4 different sized small screws. I fit one where I lost my crown guard screw and it worked. Granted, it doesn't look exactly like the original screw (if someone's anal enough to want to examine it with a loupe) but it worked and i applied locktite. Nice easy solution. Thanks Joe! Dave Link to comment Share on other sites More sharing options...
Chronus Posted April 1, 2006 Report Share Posted April 1, 2006 The dealer will send me some screws when he has some available. Is it a good idea to apply loctite to these screws on the outside? as in on the screw head after it has been screwed in, or on the actual screw-in surface, before screwing it in? Should the same be done on the screws that hold the strap to the lugs? and finally, how about on the push-pins/screws in the bracelet, and on other brands' bracelets such as Omega, Breitling, R*l*x etc? Link to comment Share on other sites More sharing options...
Jetsons Posted April 1, 2006 Report Share Posted April 1, 2006 Apply a tiny bit the Loctite to the actual screw threads. Once it sets, you're good to go. Ditto for those tiny bracelet screws. On my Pams, I don't use anything on the strap screws. I do use quality after market screws which seem to stay tight but do check them every couple of weeks or so. Link to comment Share on other sites More sharing options...
Kerbus Posted April 1, 2006 Report Share Posted April 1, 2006 Which variety of Loctite? The blue? Link to comment Share on other sites More sharing options...
narikaa Posted April 1, 2006 Report Share Posted April 1, 2006 Which variety of Loctite? The blue? Loctite or similar rated @ '222' Link to comment Share on other sites More sharing options...
TmeShare Posted April 1, 2006 Report Share Posted April 1, 2006 (edited) According to the Officine Panerai First Aid Kit (very expensive so don't ask where to get it) there are 2 Loctite products used on Panerai watches. The Kit advises as follows: Loctite 243 - For the 2 crown screws - one drop on an oil pike in each hole on the threads. Loctite 222 - For the Panerai Deploy screw and for the screws that attached the strap to the case (CAUTION: I would not suggest using Loctite 222 for these items unless you are darn sure you will not be taking them out, for changing straps. To me 222 for these functions is overkill as they are hard to remove). I would, however, strongly recommend using the Loctite 243 on the crown screws as you will rarely have to remove the screws and they are hard to locate. The first thing I do with any Panerai watch (real or replica) is remove the crown screws and do the Loctite 243 for peace of mind. AS with any Loctite product please remember.................a little goes a long way don't go overboard with the amounts used. If you send your Panerai for service remember to advise the repair person that you have used Loctite as many use low heat to loosen the loctite screws. TimeShare Edited April 1, 2006 by TmeShare Link to comment Share on other sites More sharing options...
Kerbus Posted April 11, 2006 Report Share Posted April 11, 2006 Just wanted to be sure, is this the correct one rated at 222 ? I have basic blue Loctite from Wal-Mart, I guess that's not sufficient for watch repairs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now