dbane883 Posted May 28, 2014 Author Report Share Posted May 28, 2014 This is the bezel remover I have: Link to comment Share on other sites More sharing options...
Guest mikemcnair Posted May 28, 2014 Report Share Posted May 28, 2014 That is a nice piece!! i use this, with good results so far.... Link to comment Share on other sites More sharing options...
live1 Posted May 28, 2014 Report Share Posted May 28, 2014 Does anybody want to sell me his old noob v3 bezel insert? im selling my v3 dial crystal hands and bezel assembly and platinum my own platinum mod insert Link to comment Share on other sites More sharing options...
melav8r Posted December 28, 2019 Report Share Posted December 28, 2019 (edited) Dbane883, did you ever install this bezel assembly on a watch? i purchased an aftermarket bezel set but the nylon ring that inserts in the slot on the bottom of the bezel is not T-shaped as you described on the one that cane with your gen set. also as you last described I believe the sequence of assembly is: 1. Crystal with gasket over rehaut. 2. Clamping ring pressed over crystal gasket. 3. Springs, bearings, clicker. 4. Bezel, with bezel nylon fastening ring installed in the bezel groove, pressed over clamping ring. 5. Bezel insert ring placed on bezel. 6. Bezel insert pressed into bezel. Dont think there is any nylon clip holding insert into bezel. Insert simply press fits into bezel. Edited December 28, 2019 by melav8r Link to comment Share on other sites More sharing options...
Tribal Posted January 16, 2020 Report Share Posted January 16, 2020 Dbane883, did you ever install this bezel assembly on a watch? i purchased an aftermarket bezel set but the nylon ring that inserts in the slot on the bottom of the bezel is not T-shaped as you described on the one that cane with your gen set. also as you last described I believe the sequence of assembly is: 1. Crystal with gasket over rehaut. 2. Clamping ring pressed over crystal gasket. 3. Springs, bearings, clicker. 4. Bezel, with bezel nylon fastening ring installed in the bezel groove, pressed over clamping ring. 5. Bezel insert ring placed on bezel. 6. Bezel insert pressed into bezel. Dont think there is any nylon clip holding insert into bezel. Insert simply press fits into bezel. The Insert is press fit on the bezel,But must be first installed on bezel.You can press the bezel include the insert with your hands. You must look for the Hyrtelring (Nylonring) sits in the right direction in the Bezel. There is only one way to do it.Gesendet von meinem Mi MIX 2S mit Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now