Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Gen SubC bezel/insert installation question


Recommended Posts

Guest mikemcnair
Posted

That is a nice piece!!  i use this, with good results so far....

 

photo1-5.jpg

 

photo2-5.jpg

Posted

Does anybody want to sell me his old noob v3 bezel insert?

im selling my v3 dial crystal hands and bezel assembly and platinum my own platinum mod insert

  • 5 years later...
Posted (edited)

Dbane883, did you ever install this bezel assembly on a watch?

i purchased an aftermarket bezel set but the nylon ring that inserts in the slot on the bottom of the bezel is not T-shaped as you described on the one that cane with your gen set.

also as you last described I believe the sequence of assembly is:

1. Crystal with gasket over rehaut.

2. Clamping ring pressed over crystal gasket.

3. Springs, bearings, clicker.

4. Bezel, with bezel nylon fastening ring installed in the bezel groove, pressed over clamping ring.

5. Bezel insert ring placed on bezel.

6. Bezel insert pressed into bezel.

Dont think there is any nylon clip holding insert into bezel. Insert simply press fits into bezel.

13E3FA75-8FF8-4389-845B-8A8088B0EF26.jpeg

Edited by melav8r
  • 3 weeks later...
Posted
Dbane883, did you ever install this bezel assembly on a watch?
i purchased an aftermarket bezel set but the nylon ring that inserts in the slot on the bottom of the bezel is not T-shaped as you described on the one that cane with your gen set.
also as you last described I believe the sequence of assembly is:
1. Crystal with gasket over rehaut.
2. Clamping ring pressed over crystal gasket.
3. Springs, bearings, clicker.
4. Bezel, with bezel nylon fastening ring installed in the bezel groove, pressed over clamping ring.
5. Bezel insert ring placed on bezel.
6. Bezel insert pressed into bezel.
Dont think there is any nylon clip holding insert into bezel. Insert simply press fits into bezel.
13E3FA75-8FF8-4389-845B-8A8088B0EF26.thumb.jpeg.bc72ab4942cad5fc4d2458a62ef57bd2.jpeg
The Insert is press fit on the bezel,
But must be first installed on bezel.
You can press the bezel include the insert with your hands. You must look for the Hyrtelring (Nylonring) sits in the right direction in the Bezel. There is only one way to do it.

Gesendet von meinem Mi MIX 2S mit Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up