snow75 Posted June 18, 2014 Report Share Posted June 18, 2014 Hello, I was wondering that has anyone else had any problems with the asia P9000 auto winding? My watch is running and keeping time perfectly when I manually wind the watch but in a watch winder it dies in about 48 hours. I've had the winder in constant clockwise rotation 2 rounds/minute and made sure that the counter weight rotates proberly. I can hear the some kind of spring winding sound and klick after every about 2 or 3 rotations. But the main sping is not getting wound. Our respected dealer askend me to send the watch back, but wouldn't want to bother him if there could be easy fix for the problem. Went yesterday to few local watchmaker but they were not willing to repair replica watch. Would appreciate your comments Link to comment Share on other sites More sharing options...
436NR Posted June 18, 2014 Report Share Posted June 18, 2014 What's happening when you where the watch without manually winding it? Does it run down or does it continue to run beyond 48 hours? 1 Link to comment Share on other sites More sharing options...
snow75 Posted June 19, 2014 Author Report Share Posted June 19, 2014 if I wear the watch it runs down same speed as in winder. so approx 48hours Link to comment Share on other sites More sharing options...
Jkay Posted June 19, 2014 Report Share Posted June 19, 2014 It sounds like your reversing gears in the autowind bridge are gummed up and need to be cleaned and oiled. Hopefully not replaced. Just to make sure you know .. the genuine and the replica 775x series movement in your watch only auto-winds in one direction. Not both, like an ETA clone. Make sure your auto winder is turning in one direction, not both, and that its turning in the right direction. Oh and very important .. manually winding the gen and the rep 775x movements will break them. almost 100% assured. Link to comment Share on other sites More sharing options...
snow75 Posted June 19, 2014 Author Report Share Posted June 19, 2014 Thanks! Yes, I've been useing only one way rotation in the winder. Clockwise so that the rotor runs counter clocwise and should be winding the main spring. That just doesn't happen Link to comment Share on other sites More sharing options...
snow75 Posted August 4, 2014 Author Report Share Posted August 4, 2014 It seems like a sad end to this story. I did send the watch back to our trusted dealer for repair more than 6 weeks ago. I have the tracking information stating that he has received the watch ( including the receipt signature ) and he says never received it. Any ideas what I could do? Link to comment Share on other sites More sharing options...
pcardoza Posted August 4, 2014 Report Share Posted August 4, 2014 Ugh. Send proof of delivery to the TD and if he blows you off, ask the mods to help intervene. Link to comment Share on other sites More sharing options...
snow75 Posted August 4, 2014 Author Report Share Posted August 4, 2014 I did send the proof already. I really want to beleave it's just a misstake, let's see how it turns out. Link to comment Share on other sites More sharing options...
snow75 Posted October 24, 2014 Author Report Share Posted October 24, 2014 Hello, follow up to this on. The watch was serviced and returned with same problem. The dealer is now willing to replace the watch, but asks me to re-send it to service. The last trip took about 4 Months, so rdoing it again is not too tempting. Would anyone one spare p9000 movement for Bronzo that I could purchase? Link to comment Share on other sites More sharing options...
panermaniac Posted October 24, 2014 Report Share Posted October 24, 2014 I'm having the same problem with my bronzo. I sent it to Goin today. I'll let you know how it turns out. Link to comment Share on other sites More sharing options...
snow75 Posted October 25, 2014 Author Report Share Posted October 25, 2014 thanks! let's hope that can fix yours! Link to comment Share on other sites More sharing options...
Samurai Posted November 4, 2014 Report Share Posted November 4, 2014 My bronzo has the same issue. I had sent it back for repairs - came back with the exact same problem. Not bothering to send it back now - too much of a risk with shipping etc. Link to comment Share on other sites More sharing options...
panermaniac Posted November 4, 2014 Report Share Posted November 4, 2014 My bronzo has the same issue. I had sent it back for repairs - came back with the exact same problem. Not bothering to send it back now - too much of a risk with shipping etc. You have to be careful, these A7750s don't like being hand wound. Link to comment Share on other sites More sharing options...
snow75 Posted November 4, 2014 Author Report Share Posted November 4, 2014 Does anyone know how to fix the problem and is it just the v1 with this issue? Is v2 any better? I can't wear the watch without hand winding it and I'm afraid to brake the movement Link to comment Share on other sites More sharing options...
snow75 Posted November 4, 2014 Author Report Share Posted November 4, 2014 BTW. Does anyone know if the P9000 movement can be replaced with valjoux 7750? I don't care if It looks wrong. More concerned if the date wheel and handsfree will fit Link to comment Share on other sites More sharing options...
panermaniac Posted November 5, 2014 Report Share Posted November 5, 2014 No idea about the 7750 transplant, but I heard from Goin yesterday and he said he fixed the auto wind problem. Yay Link to comment Share on other sites More sharing options...
snow75 Posted November 5, 2014 Author Report Share Posted November 5, 2014 Any idea what needs to be done? Link to comment Share on other sites More sharing options...
panermaniac Posted November 5, 2014 Report Share Posted November 5, 2014 No idea, I'll ask him when he finishes with my 389 Link to comment Share on other sites More sharing options...
snow75 Posted November 5, 2014 Author Report Share Posted November 5, 2014 Great, thanks! Link to comment Share on other sites More sharing options...
snow75 Posted November 19, 2014 Author Report Share Posted November 19, 2014 Any news solving the problem? Link to comment Share on other sites More sharing options...
panermaniac Posted November 19, 2014 Report Share Posted November 19, 2014 I got it back with a baggy containing a broken wheel. It started right up when I shook it, but after wearing it for 3 hours I noticed it had stopped. I haven't worn it since. Sorry, I can't be more help. Link to comment Share on other sites More sharing options...
snow75 Posted November 20, 2014 Author Report Share Posted November 20, 2014 sorry to hear that the fix didn't help Link to comment Share on other sites More sharing options...
panermaniac Posted November 20, 2014 Report Share Posted November 20, 2014 sorry to hear that the fix didn't help Thanks, I'll try wearing it again this weekend and see if it's okay. I'm pretty gutted about the whole ordeal. Link to comment Share on other sites More sharing options...
panermaniac Posted November 21, 2014 Report Share Posted November 21, 2014 Yahoo! I wore it today with no problems! Could it be true? Link to comment Share on other sites More sharing options...
snow75 Posted November 22, 2014 Author Report Share Posted November 22, 2014 that's great to hear! could you post a picture of the wheel so I could check if I have the same problem? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now