nathanchau22 Posted August 29, 2014 Report Share Posted August 29, 2014 Hi all I have ordered my first rep last week and the TD shown me tge QC would like to seek for your advise and suggestions. This is my first Rep first Pam and birthday present for myself, so would like to make sure this is good. I have been working hard for this from internet and here. However experience is more important on this area. Please help 1. Is dials too green? 2. Is number 9 look too fit? 3. Do u think the dark spot at the back is just dirty or wht? 4. Is it Noob Best V2 M series? 5. Any other comment? Thank u for your help Link to comment Share on other sites More sharing options...
Mike on a bike Posted August 29, 2014 Report Share Posted August 29, 2014 No Pam expert but all in all looks OK, sure the guys will find flaws but all reps have flaws. Here is the noob v2: GEN Link to comment Share on other sites More sharing options...
nathanchau22 Posted August 29, 2014 Author Report Share Posted August 29, 2014 Your noob v2 qc pic look beter than mine. Do u think my one number 9 look too fit Link to comment Share on other sites More sharing options...
Mike on a bike Posted August 29, 2014 Report Share Posted August 29, 2014 "too fit" do you mean close? Link to comment Share on other sites More sharing options...
nathanchau22 Posted August 29, 2014 Author Report Share Posted August 29, 2014 Sorry i meant fat sorry for typo Link to comment Share on other sites More sharing options...
nathanchau22 Posted August 29, 2014 Author Report Share Posted August 29, 2014 The back or tail or right hand dont know how to describe look fat than usual Link to comment Share on other sites More sharing options...
Mike on a bike Posted August 29, 2014 Report Share Posted August 29, 2014 I get what you are saying and yes looks a bit thicker than the gen “9 " also a little less defined on the close of the 9 but hey like 7-8 grand less, temper your expectations it is a rep. Link to comment Share on other sites More sharing options...
nathanchau22 Posted August 29, 2014 Author Report Share Posted August 29, 2014 Thank you man, i know it is a rep there must be little different compare with Gen. However, now would like to compare with indentical Rep as quality control.... as compare with your rep photo and your comment, i think the number 9 do has problem .... and noticiable.... The numebr 9 from mine rep is thicker than your rep photo... Thank you very much... Link to comment Share on other sites More sharing options...
coffindodger Posted August 29, 2014 Report Share Posted August 29, 2014 i think it looks ok i would take it , like Mike says its a rep its not going to be 100%. If you ask for another it will probably look the same and your just wasting time when it could be in the post. Link to comment Share on other sites More sharing options...
xpletiv Posted August 31, 2014 Report Share Posted August 31, 2014 It's too clean to be a mistake, like a blob or smudge. The next couple hundred may look the same=same batch, so you'll be wasting the time and patience of the TD. And if you know its a Rep then accept Rep faults. If the number was crooked or peeling off that's another thing. And most won't know the difference even if you point it out. Link to comment Share on other sites More sharing options...
405356momo Posted October 7, 2014 Report Share Posted October 7, 2014 (edited) Number on the bezel to big Edited October 7, 2014 by 405356momo Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now