Devedander Posted December 13, 2006 Report Share Posted December 13, 2006 It seems Rolex caseback tools come in both nylon and metal... I was wondering if there is a concensous as to which one is better... it seems nylon would run less chance of scratching things, but might bet stripped easily and not be as tough overall. Metal ones seem like they would be more durable but might run the risk of scratching stuff up if you slip... So what do you guys go for? Link to comment Share on other sites More sharing options...
RWG Technical Posted December 13, 2006 Report Share Posted December 13, 2006 Case back wrenches for Rolex should be metal, the reason that the caseback has teeth is to allow it to mesh with the teeth on the wrench, nylon just wont' do the same. If your using a correct case opening tool, the watch is held down, the caseback tool is screwed down and held tight against the case back, mating with the teeth, and there is no risk of slippage. Since the nylon cant' mesh with the teeth, your left to generate the required friction by pressing harder on the nylon tool, and risking damage to the bezel or crystal from this pressure... LG Openall is a cheap (price $$) but very effective and safe tool for opening all Rolex casebacks... RG RG Link to comment Share on other sites More sharing options...
Devedander Posted December 13, 2006 Author Report Share Posted December 13, 2006 Thanks The Zigmeister! it's always hard for me in those situations where theoretically both have some advantage! Got a movement holder from birdman so hopefully that and a metal caseback tool will get me into my Rolexes so I can... well... see the inside BTW out of curiousity are metal tools usually made of aluminum or steel? Link to comment Share on other sites More sharing options...
RWG Technical Posted December 13, 2006 Report Share Posted December 13, 2006 BTW out of curiousity are metal tools usually made of aluminum or steel? As with any tool, it should be harder than the part being worked on... My Rolex caseback dies are hardened tool steel, you can't even file them. Aluminum would strip, it's softer than the stainless of the caseback. RG Link to comment Share on other sites More sharing options...
Pugwash Posted December 13, 2006 Report Share Posted December 13, 2006 My cheap holder solution: A reversed NATO strap. Link to comment Share on other sites More sharing options...
Devedander Posted December 13, 2006 Author Report Share Posted December 13, 2006 Hehe... well I don't have a NATO strap (not even good at changing straps yet) but the movement holder seems to be good stuff... I am under the impression nylon can't scratch anthing on a watch right? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now