capricho Posted September 28, 2014 Report Share Posted September 28, 2014 I wanted to replace the TC insert with a gen insert and I ran into a snag. By carefully popping off the bezel, the entire bezel assembly came off with it, including the crystal. What's the trick in removing only the bezel and insert? Quote Link to comment Share on other sites More sharing options...
Bc1221 Posted September 28, 2014 Report Share Posted September 28, 2014 Hehe. I did the exact same thing. To remove just the bezel, just catch It on the edge of the bezel and pop it up. I don't know what you used but I used a thin flat head between a polishing cloth and it did the trick. Kinda worked out getting the crystal out as the dial had 2 pieces of lint on it and the gasket was dry as a bone. Hope you have a crystal press to get the retaining ring back on tight Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.