Jump to content
When you buy through links on our site, we may earn an affiliate commission.

Bc1221

Member
  • Posts

    463
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Bc1221

  1. Damn. The rehaut on the MBW case is DEEEP. holy crap! I thought I had a bunch of rehaut milling to do for my JF but that’s seems fine after seeing this. You could try putting a overlay on top of the VR datewheel. That’s pretty much what JF, ARF does with their clone movements and they work fine. Here’s one a RWG member made. https://rwg.cc/datastore/attachments/monthly_09_2012/post-10838-0-68609200-1347931856.jpg It’s still have the flat top 3s but it’s still vintage. I would think printing on a semigloss paper would work. You just don’t get the raised printing. (Does 16800s even have raised printing?) I don’t remember. My build is just gonna have the modern gen datewheel. It’s just easier and I can live with closed 6s and 9s. I’ll just not wear it on those days. Lol. Sent from my iPhone using Tapatalk
  2. My milgauss and a recently acquired Yachtie.
  3. Still at it eh? Hehe id go with the SELs.
  4. Here's one of my favs. Minor modding. I wanted to lume it but those numbers scare me. lol
  5. the other day, i was searching for some things and i kept seeing links to this forum. the whole time i was thinking "damn.. is there yet ANOTHER RWG???" love the new look
  6. and with the font spacing, im assuming youre talking about the 300m and the 300 m bit.. again, the gens have different variations so its correct on the rep. you may want to do some more reading before posting.
  7. i dont think the crystal is flush with the bezel on the gen buddy. see?
  8. that is a BEAUTIFUL dial. shame its got a ton of eyes on it. i have a feeling the price is about to start climbing..
  9. http://www.ebay.com/itm/Clark-Sapphire-crystal-for-Rolex-25-295C-2-295C2-25-295C2-/231574350860?pt=LH_DefaultDomain_0&hash=item35eae82c0c id go gen but if you dont want to do that, i think clark makes a solid crystal. i think it comes with a new gasket too.
  10. ^^^ im with him. i think its prob the AR coating unless its pretty deep or your keys have diamond tips.. if its just the AR, you can buff out the rest of the AR and have a clean looking crystal. as for replacing, you could try contacting a TD. ryan at intime was always helpful if i needed parts.
  11. ^^^ seems like some people need it fully laid out. Step 1. Remove bezel. Step 2. CAREFULLY remove the click spring and take off the tension washer. Step 3. Remove retaining ring around crystal. if you dont have the proper tools, this can be done very carefully with a Xacto knife and a thin screwdriver. just be sure to tape up the case so it doesnt scratch. Step 4. Remove crystal + Gasket from either the case or the retaining ring. Step 5. Clean the hell out of new crystal with something that produces as little lint as possible. i find the little cloths for your eye glasses works best. Step 6. With a blower or keyboard duster, get all the dirt and lint off the underside of the crystal. (This sounds easy but itll). - Check under a bright light to be sure its crystal clear. wearing gloves helps this process move a little faster. Step 7. Attach new crystal to new gasket and align it on the case. Step 8. Attach retaining ring to the top of the crystal and push down as far as you can with your hands. Step 9. Tighten (if you can push the retaining ring all the way down with your hands, you probably need a new gasket. - A Crystal press works best but if you dont have one, you can DIY one for fairly cheap. - DIY Crystal press (pretty ghetto but it works) : just go to your local hardware store and pick up a PVC pipe that fits perfectly over the retaining ring and a C-Clamp. Cut the pipe to about a inch tall. Cover the edge with masking tape or something that wont scratch the retaining ring. Put the piece of pipe over the retaining ring and lay a block of wood (anything flat and hard) over the pipe and cloth on the bottom of case. Get a C- Clamp and put it over the block of wood and the bottom of the watch case so nothing gets scratched. tighten. Step 10. realize you missed some dust and finger print on the under side and start over. this may happen a few times if its your first time. Step 11. Attach tension washer, click spring and bezel. Step 12. Admire your new crystal from every angle and second guess it being straight over the date window.
  12. I wouldn't bleach the dial.... Not unless you want a sterile dial at the end of it..
  13. absolutely amazing work!! now i REALLY want to convert my TC in a 16800....
  14. women dont really give a crap about watches these days... i think i met 1 woman in the last...10 or so years that actually even noticed my watch. reason being...she worked at a AD for a few brands and was wearing a breitling. really knew her [censored] too. shame she was married.
  15. i have the exact same bezel press nice work!
  16. ^^ i agree. i used to LOVE big watches. i wore 45 and 47mm ones and looking back now, i must have looked ridiculous. the biggest watch i wear now is a 40mm TC Sub and sometimes that feels pretty big. i think my 36mm Vintage EXP I is the perfect size. i also have a 6.5in wrist. keep the watch man. its the perfect size for you. youre not a rapper trying to "ball out" or whatever. its a good looking watch. id just replace the hands and it would be perfect.
  17. Yea. TC doesn't sell 21j hands. You can order some from raffles. I might actually have a hour and min hand for a 21j. I think they're gold though. If you want em, I can mail them to you.
  18. the explorers are great reps. the main flaw is the hands. easily fixed with a set of TC hands unless its a 21j. there are plenty of skinny merc hands for 21js too. everything else looks great.
  19. it really depends on what kind of glue you used and if the watch has a crystal or a plexi. if its on a plexi, dont heat it. the heat it would need to remove the glue would melt the plexi. if its just regular glue, heat would take it off but see above. you could also use "Goof Off". its pretty much citrus oil. you just gotta work it in to the nooks and crannies. that stuff is pretty good at removing glue. it just makes a mess because its so oily.
  20. Has anybody tried PayPal's new "pay after delivery" service yet? sounds like a good idea but i dont know the details about it.. BTW, i think even with the PP Gift option, people still got screwed on RWI.
  21. ^^ mark makes it look sooo damn easy. I tried that when i mucked up the keyless on my TC and ended up breaking more stuff so I just sent it out for a full service before I messed it up more
×
×
  • Create New...
Please Sign In or Sign Up