M5kirk Posted December 18, 2006 Report Share Posted December 18, 2006 I have a PAM127 from Joshua... latest version with the swan neck. I had an older 127 from EL and on that one the strap simply unscrewed from the case. I went to change the strap on this one and it looks like it's the same but when I try to unscrew it the screw just turns freely... whether I'm loosening or tightening. This behavior is the same for both screws... just wondering if I'm missing something here or if I have a problem and if it is broken how I would go about getting something like this fixed. Any advice greatly appreciated. Cheers! Kirk Quote Link to comment Share on other sites More sharing options...
chris5264 Posted December 18, 2006 Report Share Posted December 18, 2006 either the lug screws are stripped or the case is. I would try putting pressure from the other side, like a toothpick while trying to unscrew it. If there are no tubes in the strap, you can also try holding really tight onto the lug screw via the strap and try turning it. If it's just the screws, no problem with a replacement. However if it is the case it could be more problematic. Either a case replacement or you could pick up some spring bars from River which work really well. Quote Link to comment Share on other sites More sharing options...
M5kirk Posted December 19, 2006 Author Report Share Posted December 19, 2006 Thanks for the reply. I'll try the toothpick trick this evening... hopefully it's just the screws that have stripped and not the case. Thanks for the tip on spring bars from River too. Cheers! Kirk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.