Noob DSSD with 2824 movement, upgrade to gen crown/tube, winding not smooth

[sharkman07]

Hi guys, can anyone advise which crown/tube I should look for to fit to the above watch?

 

Same as the TC Sub's, the watch does not have a smooth movement when winding, feeling like it slides off the thread. This has been a characteristic of every TC I have had and really annoys me. So to eliminate it I'd like to upgrade.

 

Could I get away with just a tube upgrade or is it advisable to do both?

 

Many thanks.

[DVNE]

For the TC's, I thought it was well documented that the O ring used by TC was too big (hence the winding issue) and it needed to be swapped out for a Clarks?

 

For your DSSD, I was never aware that they made a 2824 version. I thought they were all 2836 stem height cases. You can't switch em...

Edited June 16, 2015 by DVNE

[sharkman07]

For the TC's, I thought it was well documented that the O ring used by TC was too big (hence the winding issue) and it needed to be swapped out for a Clarks?

 

For your DSSD, I was never aware that they made a 2824 version. I thought they were all 2836 stem height cases. You can't switch em...

Thanks for the reply, it has a transplanted Tissot 2824. It's definitely the same winding issue as the TC Sub. Works fine, just annoys me.

[DVNE]

The winding issue is because of the stem height. Swap it out for a 2836 and I bet everything will work fine.

 

You are killing the 2824 in that kind of case...