lello Posted December 23, 2006 Report Share Posted December 23, 2006 (edited) Question for the technical guys... I was changing crown to my new Pam 199 with asian 7750 and while I was inserting the stem, I guess a wheel went wrong and now the watch doesn't run anymore. The stem go inside and when I pull it out, it makes the first click, but the date it's blocked. No way to pull it out further to move the hands. But when it is all inside, if you turn the crown, all seams fine, as all wheels seams to work and winding. Do I need to disassembling the bridges to re set up the little wheels around the stem, or is there any way to solve it, without disassembling it? Thanks in advance for any suggestion. Edited December 23, 2006 by lello Quote Link to comment Share on other sites More sharing options...
gioarmani Posted December 24, 2006 Report Share Posted December 24, 2006 Sound like the keyless is screwed up? I'd definitely take it to a watchmaker; 7750's are a pain in the ass. Quote Link to comment Share on other sites More sharing options...
flavor flav Posted December 24, 2006 Report Share Posted December 24, 2006 Sound like the keyless is screwed up? I'd definitely take it to a watchmaker; 7750's are a pain in the ass. definatly keyless is jacked up. i'm sure nothing broken but needs reset. did you remove the crown in time-set position? and did you slightly depress the release button when reinserting the crown or just jam it in? Quote Link to comment Share on other sites More sharing options...
lello Posted December 24, 2006 Author Report Share Posted December 24, 2006 I was careful to take the stem out, when it was in the inside position. It's happened when I put it back, as it didn't go easily and when it went through, something happened. I will have to wait after Christmas to go to the watchsmith then... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.